Development single board radar with a narrow beam long range 100m+
Budget: $15 – $25 USD
Please do not send a generic message, answer the project details.
Development and design of turnkey system components in a single embedded board. An electronic board plus basic configuration software.
The expectation is to design a circuit that uses boards/chips/circuits/systems that exist in western sources like Mouser, Digikey and etc. Would be used in the USA, Canada, Latin America and if possible can pass or avoid FCC certification by using components or design that does not need one.
The purpose of the project is: To install a radar with a narrow beam that can detect human movement crossing the narrow beam from left to right or right to left, apply an algorithm to rain, snow, avoid birds, small animals, branches waving in front of it.
The radar would have software to visualize its signal area and detection, will have sensitivity adjustment and possible detection type adjustment, have a UART and I/O inputs/outputs.
ANSWER SPECIFICALLY: Do you know or have specific experience with radar development? have you read my requirement in detail and understood what I would like to do? If you please ask clarification questions
Please describe exactly which chip or boards would you use for this project, how would you solve this issue?
Development and design of turnkey system components in a single embedded board. An electronic board plus basic configuration software.
The expectation is to design a circuit that uses boards/chips/circuits/systems that exist in western sources like Mouser, Digikey and etc. Would be used in the USA, Canada, Latin America and if possible can pass or avoid FCC certification by using components or design that does not need one.
The purpose of the project is: To install a radar with a narrow beam that can detect human movement crossing the narrow beam from left to right or right to left, apply an algorithm to rain, snow, avoid birds, small animals, branches waving in front of it.
The radar would have software to visualize its signal area and detection, will have sensitivity adjustment and possible detection type adjustment, have a UART and I/O inputs/outputs.
ANSWER SPECIFICALLY: Do you know or have specific experience with radar development? have you read my requirement in detail and understood what I would like to do? If you please ask clarification questions
Please describe exactly which chip or boards would you use for this project, how would you solve this issue?