Design and build a cable tester for ribbon cable 96 ways
Budget: €250 – €750 EUR
I want to build a 96 pin ribbon cable tester.
It has to test each pin on one side of the cable to every pin on the other side of the cable
It has to measure Open circuit or Short circuit, no impedance nor capacitance, etc
Two modes of working:
Discovery: Measure the cable and save the connections of the cable to a file.
Test against a file: Load a file with cable pinout and test if the testing cable is equal to the file (in case it is not equal, save the file with the testing cable pinout)
I want te hardware, not only the software. Don´t need fancy things, just something that works.
It has to test each pin on one side of the cable to every pin on the other side of the cable
It has to measure Open circuit or Short circuit, no impedance nor capacitance, etc
Two modes of working:
Discovery: Measure the cable and save the connections of the cable to a file.
Test against a file: Load a file with cable pinout and test if the testing cable is equal to the file (in case it is not equal, save the file with the testing cable pinout)
I want te hardware, not only the software. Don´t need fancy things, just something that works.