Design a PCB - ESP32, POE
Budget: $15 – $25 USD
We are looking to create a board that takes DC/POE in, powers a microcontroller and interfaces with a stepper motor controller ("payload").
We wish to utilize the following chips: TPS23730 (ACF), ESP32, W5500, DRV8711.
The design must prevent noise going from/to the payload.
The payload (= stepper motor controller) must be separate from the rest of the circuit/board so that the design can easily be reused for other payloads.
If we are satisfied, we will also have you create other payloads: MOSFET board, RC receiver, GPS, and others.
We wish to utilize the following chips: TPS23730 (ACF), ESP32, W5500, DRV8711.
The design must prevent noise going from/to the payload.
The payload (= stepper motor controller) must be separate from the rest of the circuit/board so that the design can easily be reused for other payloads.
If we are satisfied, we will also have you create other payloads: MOSFET board, RC receiver, GPS, and others.