Design Hardware for ESP32 (Lighting with WS2815)
Budget: $30 – $250 USD
Hey,
I am looking for someone who will Design Hardware for ESP32 (Lighting with WS2815). I will do software by myself
1. Power Supply
- Battery-operated - 2x18650 batteries connected in series
- Ability to be powered by 12v (mains adapter)
2. StepUp to 12v for powering the programmable WS2815 LED strip (unless someone convinces me that it's better to use WS2813 with StepDown)
- Power consumption for the LED strip, at least 50W, max ~200W
- Logic level converter required from 3.3v -> 5v
3. StepDown for powering the ESP32
4. OLED display 128x64 I2C
5. Measurement of power supply voltage and power consumption
6. Power activation via a mechanical switch
7. 2x rotary encoder with button
8. Connector for programming the ESP32
I am looking for someone who will Design Hardware for ESP32 (Lighting with WS2815). I will do software by myself
1. Power Supply
- Battery-operated - 2x18650 batteries connected in series
- Ability to be powered by 12v (mains adapter)
2. StepUp to 12v for powering the programmable WS2815 LED strip (unless someone convinces me that it's better to use WS2813 with StepDown)
- Power consumption for the LED strip, at least 50W, max ~200W
- Logic level converter required from 3.3v -> 5v
3. StepDown for powering the ESP32
4. OLED display 128x64 I2C
5. Measurement of power supply voltage and power consumption
6. Power activation via a mechanical switch
7. 2x rotary encoder with button
8. Connector for programming the ESP32