Design Circuit Board / PCB -- 2
Budget: $10 – $56 USD
Hi,
I'm wanting a circuit board / pcb created.
Running power supply is 12v.
Detection input is 48v.
Output voltage is 6v.
5 detection inputs and 5 outputs.
The basic setup is as follows:
(Needs to have OPTO ISOLATORS so voltages don't 'cross' paths.)
- Detect when 48v line goes live / has current
- Turn on 6 v output for x number of seconds / dip switch / POT adjuster.
Advanced Features:
Output of 6v is controlled via a basic IC CHIP which should have some very basic programming.
EG flash once, flash twice, flash 3 times, pulse etc.
Would need a dip switch to control how many flashes or 'function' of the IC that is being run???
I'm not sure on this last part.
Possible further advanced feature would be to always have the 6v on, but if the 48v line goes live then have it pulse on off/flash x number of times etc.
If you can't do the work please don't bid, this is for a home use project hence small budget, thanks for understanding.
Thanks
Tristan
I'm wanting a circuit board / pcb created.
Running power supply is 12v.
Detection input is 48v.
Output voltage is 6v.
5 detection inputs and 5 outputs.
The basic setup is as follows:
(Needs to have OPTO ISOLATORS so voltages don't 'cross' paths.)
- Detect when 48v line goes live / has current
- Turn on 6 v output for x number of seconds / dip switch / POT adjuster.
Advanced Features:
Output of 6v is controlled via a basic IC CHIP which should have some very basic programming.
EG flash once, flash twice, flash 3 times, pulse etc.
Would need a dip switch to control how many flashes or 'function' of the IC that is being run???
I'm not sure on this last part.
Possible further advanced feature would be to always have the 6v on, but if the 48v line goes live then have it pulse on off/flash x number of times etc.
If you can't do the work please don't bid, this is for a home use project hence small budget, thanks for understanding.
Thanks
Tristan