Circuit Design
Budget: $10 – $30 USD
I need a circuit schematics design with specific properties. These are:
- The card is supplied with + 24V.
- It must have a push-button, four LEDs, and a buzzer.
- When you push the button, LEDs and the buzzer work. While the button is staying pressed, the LEDs must continue to light. But the buzzer works for a while and then stops.
- Buzzer works with 5V.
- The push-button has 4 pins.
- The sizes of two-layer PCB are 31mm x 31mm. That is why the components should pick according to this information.
Please do not hesitate to ask any questions if you may have.
- The card is supplied with + 24V.
- It must have a push-button, four LEDs, and a buzzer.
- When you push the button, LEDs and the buzzer work. While the button is staying pressed, the LEDs must continue to light. But the buzzer works for a while and then stops.
- Buzzer works with 5V.
- The push-button has 4 pins.
- The sizes of two-layer PCB are 31mm x 31mm. That is why the components should pick according to this information.
Please do not hesitate to ask any questions if you may have.