Build Firmware for a Board with ESP32 and UWB
Budget: $250 – $750 USD
I am seeking an electronic senior engineer developer to build a firmware for a board that uses ESP32 and UWB technology. The primary function of the firmware is indoor tracking, and I am open to suggestions for the specific UWB module to use but must have an ESP32 module. The firmware bot both anchor and TAG, should report the distance from a Tag to an Anchor and the (X, Y) position in meters.
The ideal candidate for this job should have experience in firmware development using ESP32 and knowledge of UWB technology for indoor tracking with measures over 100mts.
I'm also open to buying the board from your own making and design.
The project Success will be finished with the delivery of the firmware and the purchase of the suggested boards. Once the boards arrived at my home I'll load the firmware and do the testing. If it works milestones will be accomplished.
The ideal candidate for this job should have experience in firmware development using ESP32 and knowledge of UWB technology for indoor tracking with measures over 100mts.
I'm also open to buying the board from your own making and design.
The project Success will be finished with the delivery of the firmware and the purchase of the suggested boards. Once the boards arrived at my home I'll load the firmware and do the testing. If it works milestones will be accomplished.