Assistance with Pin Identification on 24V Inverter
Budget: ₹600 – ₹601 INR
I'm working with a 24V, 1400VA Amaron pure sine wave inverter kit that uses a relay-based changeover circuit. The PCB has 6 pins (labeled 1 to 6) for AC input/output connections. I've attached a hand-drawn diagram for reference.
Relay Behavior:
The relay is energized when the inverter (battery) is active.
The relay is de-energized when the grid power is available.
I need help with the following:
1. Which pins should be connected to the grid phase and neutral?
2. From the inverter transformer’s 230V AC output, which pins should be used to connect both wires?
3. From which pin(s) should I take the main AC output to supply power to my appliances?
There is also a 0.47uF, 350V capacitor connected between two pins, possibly for filtering or charging assistance.
Please help me identify the correct pin connections based on the circuit. Thanks!
Relay Behavior:
The relay is energized when the inverter (battery) is active.
The relay is de-energized when the grid power is available.
I need help with the following:
1. Which pins should be connected to the grid phase and neutral?
2. From the inverter transformer’s 230V AC output, which pins should be used to connect both wires?
3. From which pin(s) should I take the main AC output to supply power to my appliances?
There is also a 0.47uF, 350V capacitor connected between two pins, possibly for filtering or charging assistance.
Please help me identify the correct pin connections based on the circuit. Thanks!