To control the remote controlled toy car from a remote computer via wireless internet by canceling the remote control and putting raspery pi inside the car, that is, from the web environment.
Budget: $250 – $750 USD
To control the remote control toy car via wireless internet by canceling the remote control and putting raspery pi inside the car.
As 2 software developer friends, we started the project but could not complete it. The person we will receive service will show us how to complete the project via zoom. In this way, we will complete the project remotely with the person from whom we will receive service, that is, by proceeding step by step with the zoom application. There is raspery pi 4 on the car right now. We canceled the remote control and we can give orders to the motors on the car remotely, that is, from the computer. If there is a new hardware product required, we will buy it. For example, maybe raspery pi 5 will be needed.
There are currently 2 motors on the car. The first motor is the motor that turns the car left and right. This motor should work gradually, that is, it should not turn right and left at once. It should turn left and right gradually. The other motor is the motor that drives the car back and forth. This motor should also work gradually, that is, instead of reaching maximum speed at once, it should reach speed gradually. The same goes for the reverse direction. We also need to apply the following behavior to this engine; when we release the forward or reverse throttle, the car should not stop suddenly, it should stop slowly. There will also be 2 cameras on the car. We should be able to give this camera image to the other side. The other camera should be able to rotate 360 degrees. Also, the signal and headlights in the car should be remotely controlled. Also the horn.
These are the tasks that the software developer/electronician we will find from freelancer.com to complete this project. As 2 software developer friends, we will send these commands to the car from a web page and do all the tests. We also need to show the camera image from the camera on the car as a live broadcast on this web page.
Don't worry about the hardware needed, we will buy whatever we need right away. We will talk, maybe we will do it like this. The electronics guy we will find on Freelancer.com can complete the whole circuit and send it to us by cargo. This is also an option. We will pay for the shipping. When the project is completed, the electronics guy will earn a net salary of 500 USD.
We have everything we need to move the project forward. If we need something new, we buy it immediately.
If we do the project through zoom, we will determine the available times on both sides in advance and we will hold zoom sessions at these times.
The net fee will be paid when the project is completed completely and without errors. No milestone.
Thanks.
As 2 software developer friends, we started the project but could not complete it. The person we will receive service will show us how to complete the project via zoom. In this way, we will complete the project remotely with the person from whom we will receive service, that is, by proceeding step by step with the zoom application. There is raspery pi 4 on the car right now. We canceled the remote control and we can give orders to the motors on the car remotely, that is, from the computer. If there is a new hardware product required, we will buy it. For example, maybe raspery pi 5 will be needed.
There are currently 2 motors on the car. The first motor is the motor that turns the car left and right. This motor should work gradually, that is, it should not turn right and left at once. It should turn left and right gradually. The other motor is the motor that drives the car back and forth. This motor should also work gradually, that is, instead of reaching maximum speed at once, it should reach speed gradually. The same goes for the reverse direction. We also need to apply the following behavior to this engine; when we release the forward or reverse throttle, the car should not stop suddenly, it should stop slowly. There will also be 2 cameras on the car. We should be able to give this camera image to the other side. The other camera should be able to rotate 360 degrees. Also, the signal and headlights in the car should be remotely controlled. Also the horn.
These are the tasks that the software developer/electronician we will find from freelancer.com to complete this project. As 2 software developer friends, we will send these commands to the car from a web page and do all the tests. We also need to show the camera image from the camera on the car as a live broadcast on this web page.
Don't worry about the hardware needed, we will buy whatever we need right away. We will talk, maybe we will do it like this. The electronics guy we will find on Freelancer.com can complete the whole circuit and send it to us by cargo. This is also an option. We will pay for the shipping. When the project is completed, the electronics guy will earn a net salary of 500 USD.
We have everything we need to move the project forward. If we need something new, we buy it immediately.
If we do the project through zoom, we will determine the available times on both sides in advance and we will hold zoom sessions at these times.
The net fee will be paid when the project is completed completely and without errors. No milestone.
Thanks.