PLC+HMI programer
Budget: £250 – £750 GBP
Hi
We are installing HMI+PLC model V700-T20BJ Vision 7.0″ touch for the control of a fountain pumps. Just to give an understanding what the new panel and controller should be capable off.
The new MCC will house supplies to all pumping and dosing equipment as well as sump pump, air flow fans and flood alarm. This is so an alarm signal can easily be taken to the main feeder cabinet where a light will be fitted so that engineers can be aware of a fault within the plantroom.
The new MCC will control the main circulating pumps by means of variable speed so that flows can be adjusted at the panel by the engineers if required. Also a wind anemometer will give a feedback signal to the control panel to adjust the flow depending on wind speed, this is to prevent the jet of water being distorted to outside of the catchment pond. This will also be adjustable at the panel if required. The circulators will also operate by a programmable time switch to start and stop the pumps morning and night.
We are installing HMI+PLC model V700-T20BJ Vision 7.0″ touch for the control of a fountain pumps. Just to give an understanding what the new panel and controller should be capable off.
The new MCC will house supplies to all pumping and dosing equipment as well as sump pump, air flow fans and flood alarm. This is so an alarm signal can easily be taken to the main feeder cabinet where a light will be fitted so that engineers can be aware of a fault within the plantroom.
The new MCC will control the main circulating pumps by means of variable speed so that flows can be adjusted at the panel by the engineers if required. Also a wind anemometer will give a feedback signal to the control panel to adjust the flow depending on wind speed, this is to prevent the jet of water being distorted to outside of the catchment pond. This will also be adjustable at the panel if required. The circulators will also operate by a programmable time switch to start and stop the pumps morning and night.