Optical Fiber

I need help with my task as explained below:
1. As an engineer, you are given a task to Design Visible Light Communication (VLC)
system using OOK-RZ/NRZ modulation for the Photonic Laboratory at Block P03,
Faculty of Electrical Engineering. Suppose the dimension of the lab is (6 × 4 × 3) ?
for the length, width, and height respectively. The designer should carefully determine
the suitable number of LED lamps to avoid interference, as well as provide acceptable
communication and illumination performance.
Using MATLAB (Coding or Simulink) as a simulation platform, evaluate the VLC
system in terms of illumination level, received power, SNR, and BER. The cost
estimation of implementing this project is also required. (Hint: The components that
are available in your storeroom are stated in Table 1).
Table 1: Design parameters and components characteristics available.
Parameters Value
Room (Length x Width x Height) 6 × 4 × 3
Height level of LED lamps (h) 3 m
Height level of device/user 0.85 m
Photodetector effective area 1 ??2
Photodetector responsivity 0.54 A/W
Walls reflectivity 0.86
Floor reflectivity Walls 0.34
LED lamp semi-angle 70°
LED chip 20 mW
Field of view 60°
Bit Rate 30 Mbps
Notes:
At the end of this project, the requirement is to submit a scientific report including a title page,
abstract, introduction, materials, methods (i.e. simulation), discussion, conclusion, and
references.