Mutli Residential Exemption Application - in Perth, WA Australia
Budget: $250 – $750 AUD
I’m looking for an Electrical Engineer who is currently listed on the National Engineering Register to sign off on this exemption application and provide the relevant information for our site. The exemption would allow future PV applications (for all houses on this connection point) to be processed through the 0-30kVA process with Western Power.
What I need from you
• A site diagram that identifies
- supply type (overhead or underground)
- property/lot boundaries
- point of supply for the private installation:
- if underground, Western Power pillar/dome
- if overhead, mains connection box (typically next to point of attachment) or
- Western Power distribution substation e.g. transformer kiosk (strata and larger commercial)
- if overhead supply, the Western Power service cable run from the network to point of attachment
- transformer in rural or sole use cases
- Western Power meter
• Single-line diagram representing the site’s internal network which demonstrates compliance to AS/NZS 3000, WAER, and WASIR requirements. It must show
a. The site’s SPD, customer main switch(es), metering arrangement and switchboards;
b. The site’s internal reticulation between the Western Power connection point and each individual resident/common property areas; or
c. Representation of typical unit connection point.
• Photographs of:
a. The site’s main switchboard;
b. The site’s SPD; and
c. The site’s main switch(es).
https://www.westernpower.com.au/resources-education/faqs/connect-to-the-network/solar-connections/?FAQPageId=5220
• A professional review and sign off
Please include your NER registration number, a brief outline of similar projects you’ve signed off, and your estimated turnaround time. I’m aiming for a smooth, quick approval process and appreciate clear communication throughout.
What I need from you
• A site diagram that identifies
- supply type (overhead or underground)
- property/lot boundaries
- point of supply for the private installation:
- if underground, Western Power pillar/dome
- if overhead, mains connection box (typically next to point of attachment) or
- Western Power distribution substation e.g. transformer kiosk (strata and larger commercial)
- if overhead supply, the Western Power service cable run from the network to point of attachment
- transformer in rural or sole use cases
- Western Power meter
• Single-line diagram representing the site’s internal network which demonstrates compliance to AS/NZS 3000, WAER, and WASIR requirements. It must show
a. The site’s SPD, customer main switch(es), metering arrangement and switchboards;
b. The site’s internal reticulation between the Western Power connection point and each individual resident/common property areas; or
c. Representation of typical unit connection point.
• Photographs of:
a. The site’s main switchboard;
b. The site’s SPD; and
c. The site’s main switch(es).
https://www.westernpower.com.au/resources-education/faqs/connect-to-the-network/solar-connections/?FAQPageId=5220
• A professional review and sign off
Please include your NER registration number, a brief outline of similar projects you’ve signed off, and your estimated turnaround time. I’m aiming for a smooth, quick approval process and appreciate clear communication throughout.