12V Hydraulic D.C. Power Gear Pump Design and Test Standards Consulting
Budget: $750 – $1,500 USD
I'm on the lookout for an engineering professional knowledgeable in particularly motors and hydraulic power units, to validate the amperage usage of a Power unit which is a 80mm 12V PM motor 0.8 kW, 0.50 GPM pump with a 1.5 liter reservoir or a .13 gallon size depending on need..
Key Points:
- In terms of operation, anticipate intermittent usage.
Ideal candidate should carry experience in:
- Hydraulic power system design
- Understanding of electrical load and power unit usage
- Set efficiency testing standards under intermittent operation conditions.
This project requires keen attention to detail, accuracy in testing optimization of motor usage and power consumption. Proven experience in similar projects would be a plus.
The power unit being tested is a Monarch M-259 or similar, with two way power using a .13 Gallon tank Load testing at 400 lbs. maximum in 8 second cycles. Need to determine recovery time using a 100AH Lithium battery.
This is the 1st of several projects we are exploring and are looking for services as needed.
Key Points:
- In terms of operation, anticipate intermittent usage.
Ideal candidate should carry experience in:
- Hydraulic power system design
- Understanding of electrical load and power unit usage
- Set efficiency testing standards under intermittent operation conditions.
This project requires keen attention to detail, accuracy in testing optimization of motor usage and power consumption. Proven experience in similar projects would be a plus.
The power unit being tested is a Monarch M-259 or similar, with two way power using a .13 Gallon tank Load testing at 400 lbs. maximum in 8 second cycles. Need to determine recovery time using a 100AH Lithium battery.
This is the 1st of several projects we are exploring and are looking for services as needed.
Related categories:
Project Management
Engineering
Mechanical Engineering
Electrical Engineering
Mechanical Design