Design of a STM32 based MCU board to support HMI done in Qt
Budget: €50 – €75 EUR
I am creating a project which is based on the creation of a small HMI (Human Machine Interface) with a GUI programmed in Qt (Qt is a C/C++ framework and it allows the creation of interfaces also for MCUs). I would need the design of a schematic and the PCB design of an MCU board that has an STM32 series MCU, which either supports Qt on FreeRTOS or bare-metal. So, at the start, I would need to communicate with you in order to select the best option for the MCU, and then discuss other details.
The MCU must be supporting at least 1024x600 resolution on TFT LCD.
I would need a PCB that has:
- MCU STM32 F7x series or other series (please advise me on this)
- MIPI DSI 4L connector (for the LCD, which I already have the schematics)
- touchscreen connector (that starts from the LCD and needs to connect to the MCU board)
- SWD connector (programming connector)
- micro USB connector
- the electric module to charge the board and supply power
Ultimately, a plus and an upgrade would be to put some pins or connectors for a Bluetooth and a Wifi Module, however, this will may be required in an expansion, which we will discuss as soon as a good part of the project is done.
The MCU must be supporting at least 1024x600 resolution on TFT LCD.
I would need a PCB that has:
- MCU STM32 F7x series or other series (please advise me on this)
- MIPI DSI 4L connector (for the LCD, which I already have the schematics)
- touchscreen connector (that starts from the LCD and needs to connect to the MCU board)
- SWD connector (programming connector)
- micro USB connector
- the electric module to charge the board and supply power
Ultimately, a plus and an upgrade would be to put some pins or connectors for a Bluetooth and a Wifi Module, however, this will may be required in an expansion, which we will discuss as soon as a good part of the project is done.