python3 bulleye install err (5 stars)
Budget: $2 – $8 USD
Hey Hey - trying to do pip install bullseye and ....SCROLL DOWN SEE ERR
There is hope you can give your “best” price; unemployed, and have cancer with bills backing up, $10 possible? Please note $10 is the max total that I can handle for this (doing hourly reduces % fee). Will leave a Glowing paragraph of feedback 5 stars : - )
My funds are low but will pay quick and leave 5 stars. Please give your best possible for your bid ? (something reasonable?) Please note there is hope we can mutually complete this task; we can leave each other nice comments and 5 stars for each? Look at feedback on my profile, feedback I left for many others. Here is the project:
SINCERELY WOULD BE NICE TO MEET YOU PLEASE
ANY THOUGHTS ? Please note project is due in two hours as this projects deadline, as this is needed if we can get some done - then we can talk about next steps and 5 stars and another job also. If this is a good one and we are "successful"; would need a couple others setup, but will handle one at a time? Can you do this for something reasonable in a couple hours? thoughts ?
# pip install bullseye
Collecting bullseye
Using cached bullseye-0.1.1-py3-none-any.whl
Requirement already satisfied: numpy in /usr/local/lib/python3.9/dist-packages (from bullseye) (1.24.1)
Collecting traits>=4
Using cached traits-6.4.1-cp39-cp39-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (5.1 MB)
Collecting scipy
Using cached scipy-1.10.1-cp39-cp39-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (34.5 MB)
Collecting traitsui
Using cached traitsui-7.4.3-py3-none-any.whl (1.5 MB)
Collecting chaco
Using cached chaco-5.1.1-cp39-cp39-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (1.5 MB)
Collecting pyface>=7.2.0
Using cached pyface-8.0.0-py3-none-any.whl (1.3 MB)
Collecting enable>=5.2.0
Using cached enable-5.3.1.tar.gz (3.0 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing wheel metadata ... done
Collecting fonttools
Using cached fonttools-4.39.3-py3-none-any.whl (1.0 MB)
Collecting pillow
Using cached Pillow-9.5.0-cp39-cp39-manylinux_2_28_x86_64.whl (3.4 MB)
Requirement already satisfied: importlib-metadata>=3.6 in /usr/local/lib/python3.9/dist-packages (from pyface>=7.2.0->chaco->bullseye) (6.6.0)
Requirement already satisfied: zipp>=0.5 in /usr/local/lib/python3.9/dist-packages (from importlib-metadata>=3.6->pyface>=7.2.0->chaco->bullseye) (3.15.0)
Building wheels for collected packages: enable
Building wheel for enable (PEP 517) ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 /tmp/tmpkz7_hlh6_in_process.py build_wheel /tmp/tmpsngh49ar
cwd: /tmp/pip-install-4q29ec03/enable_0edf60cc65ae463584ac23bbeff8092d
Complete output (353 lines):
running bdist_wheel
running build
running build_ext
cythoning kiva/_cython_speedups.pyx to kiva/_cython_speedups.cpp
/tmp/pip-build-env-ghtg_ocr/overlay/lib/python3.9/site-packages/Cython/Compiler/Main.py:369: FutureWarning: Cython directive 'language_level' not set, using 2 for now (Py2). This will change in a later release! File: /tmp/pip-install-4q29ec03/enable_0edf60cc65ae463584ac23bbeff8092d/kiva/_cython_speedups.pyx
tree = Parsing.p_module(s, pxd, full_module_name)
cythoning kiva/_marker_renderer.pyx to kiva/_marker_renderer.cpp
/tmp/pip-build-env-ghtg_ocr/overlay/lib/python3.9/site-packages/Cython/Compiler/Main.py:369: FutureWarning: Cython directive 'language_level' not set, using 2 for now (Py2). This will change in a later release! File: /tmp/pip-install-4q29ec03/enable_0edf60cc65ae463584ac23bbeff8092d/kiva/_marker_renderer.pxd
tree = Parsing.p_module(s, pxd, full_module_name)
building 'kiva._cython_speedups' extension
creating build
creating build/temp.linux-x86_64-cpython-3
There is hope you can give your “best” price; unemployed, and have cancer with bills backing up, $10 possible? Please note $10 is the max total that I can handle for this (doing hourly reduces % fee). Will leave a Glowing paragraph of feedback 5 stars : - )
My funds are low but will pay quick and leave 5 stars. Please give your best possible for your bid ? (something reasonable?) Please note there is hope we can mutually complete this task; we can leave each other nice comments and 5 stars for each? Look at feedback on my profile, feedback I left for many others. Here is the project:
SINCERELY WOULD BE NICE TO MEET YOU PLEASE
ANY THOUGHTS ? Please note project is due in two hours as this projects deadline, as this is needed if we can get some done - then we can talk about next steps and 5 stars and another job also. If this is a good one and we are "successful"; would need a couple others setup, but will handle one at a time? Can you do this for something reasonable in a couple hours? thoughts ?
# pip install bullseye
Collecting bullseye
Using cached bullseye-0.1.1-py3-none-any.whl
Requirement already satisfied: numpy in /usr/local/lib/python3.9/dist-packages (from bullseye) (1.24.1)
Collecting traits>=4
Using cached traits-6.4.1-cp39-cp39-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (5.1 MB)
Collecting scipy
Using cached scipy-1.10.1-cp39-cp39-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (34.5 MB)
Collecting traitsui
Using cached traitsui-7.4.3-py3-none-any.whl (1.5 MB)
Collecting chaco
Using cached chaco-5.1.1-cp39-cp39-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (1.5 MB)
Collecting pyface>=7.2.0
Using cached pyface-8.0.0-py3-none-any.whl (1.3 MB)
Collecting enable>=5.2.0
Using cached enable-5.3.1.tar.gz (3.0 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing wheel metadata ... done
Collecting fonttools
Using cached fonttools-4.39.3-py3-none-any.whl (1.0 MB)
Collecting pillow
Using cached Pillow-9.5.0-cp39-cp39-manylinux_2_28_x86_64.whl (3.4 MB)
Requirement already satisfied: importlib-metadata>=3.6 in /usr/local/lib/python3.9/dist-packages (from pyface>=7.2.0->chaco->bullseye) (6.6.0)
Requirement already satisfied: zipp>=0.5 in /usr/local/lib/python3.9/dist-packages (from importlib-metadata>=3.6->pyface>=7.2.0->chaco->bullseye) (3.15.0)
Building wheels for collected packages: enable
Building wheel for enable (PEP 517) ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 /tmp/tmpkz7_hlh6_in_process.py build_wheel /tmp/tmpsngh49ar
cwd: /tmp/pip-install-4q29ec03/enable_0edf60cc65ae463584ac23bbeff8092d
Complete output (353 lines):
running bdist_wheel
running build
running build_ext
cythoning kiva/_cython_speedups.pyx to kiva/_cython_speedups.cpp
/tmp/pip-build-env-ghtg_ocr/overlay/lib/python3.9/site-packages/Cython/Compiler/Main.py:369: FutureWarning: Cython directive 'language_level' not set, using 2 for now (Py2). This will change in a later release! File: /tmp/pip-install-4q29ec03/enable_0edf60cc65ae463584ac23bbeff8092d/kiva/_cython_speedups.pyx
tree = Parsing.p_module(s, pxd, full_module_name)
cythoning kiva/_marker_renderer.pyx to kiva/_marker_renderer.cpp
/tmp/pip-build-env-ghtg_ocr/overlay/lib/python3.9/site-packages/Cython/Compiler/Main.py:369: FutureWarning: Cython directive 'language_level' not set, using 2 for now (Py2). This will change in a later release! File: /tmp/pip-install-4q29ec03/enable_0edf60cc65ae463584ac23bbeff8092d/kiva/_marker_renderer.pxd
tree = Parsing.p_module(s, pxd, full_module_name)
building 'kiva._cython_speedups' extension
creating build
creating build/temp.linux-x86_64-cpython-3