Modern Double Carport Design
Budget: $250 – $750 USD
I'm looking for a skilled designer to create a modern double carport using the Veikous 20x20ft metal frame and metal panels in Colorado Springs.
Requirements:
- Design a modern aesthetic double carport
- Utilize Veikous metal frame and metal panels
- Ensure structural integrity and compliance with local regulations
- Experience in carport or metal structure design is preferred
Please provide examples of previous work and a brief outline of your design approach.
BASIC BUILDING PLAN
Detached Metal Carport Permit Submittal
PROJECT INFORMATION
Project Address: 2306 Frontier Dr., Colorado Springs, CO 80911
Jurisdiction: Pikes Peak Regional Building Department (PPRBD)
Project Type: Detached Prefabricated Metal Carport
Structure Size: 20'-0" x 20'-0"
Total Area: 400 Square Feet
Manufacturer: VEIKOUS
Model Number: PG0216-05-2
Description: Metal Carport Steel Car Canopy and Shelter
SCOPE OF WORK
Install one (1) detached prefabricated metal carport structure on existing dirt driveway area adjacent to
residence. Structure to be anchored to individual concrete pier footings.
Installation to comply with:
2023 International Residential Code (IRC)
Pikes Peak Regional Building Department requirements
Manufacturer installation instructions
Local frost depth requirements
DESIGN CRITERIA
ITEM VALUE
Ground Snow Load 35 PSF
Frost Depth 30 Inches Minimum
Wind Exposure Exposure B
Occupancy Residential Accessory Structure
Roof Type Metal Panel Roof
Foundation Type Concrete Pier Footings
•
•
•
•
1
SITE PLAN
PROPERTY LAYOUT DESCRIPTION
Proposed carport located on LEFT side of residence.
Carport opening oriented toward street/front driveway.
Existing driveway area approximately 25'-0" wide x 35'-0" long.
Carport footprint approximately 20'-0" x 20'-0".
Structure to remain within property setbacks.
REQUIRED FIELD VERIFICATION
Homeowner/contractor to verify:
Exact property line locations
Utility locations prior to excavation
Easements
Final setbacks prior to installation
SCALED SITE PLAN SKETCH
SITE PLAN NOTES
Proposed carport to be installed on left side of residence.
•
•
•
•
•
•
•
•
•
1.
2
Carport opening faces street/front driveway.
Maintain minimum setbacks required by PPRBD zoning.
Verify property lines prior to construction.
Verify no easement conflicts exist.
Concrete pier footings to be centered under support posts.
Existing grade to remain generally unchanged.
APPROXIMATE DIMENSIONS
ITEM DIMENSION
Existing Driveway Width 25'-0"
Existing Driveway Length 35'-0"
Proposed Carport Width 20'-0"
Proposed Carport Depth 20'-0"
FOUNDATION PLAN
FOOTING LAYOUT
Provide six (6) concrete pier footings total.
FOOTING SPECIFICATIONS
Diameter: 16 Inches
Depth: 30 Inches Minimum Below Grade
Concrete Strength: 3000 PSI Minimum
Sonotube Forms Permitted
Bottom of footing to bear on undisturbed soil
ANCHORAGE
Install galvanized post anchor brackets or approved anchor system.
Anchors to comply with manufacturer requirements.
All hardware to be corrosion resistant.
FOOTING SPACING
(3) footings each side of structure. Approximate spacing:
Front to center footing: 10'-0"
Center to rear footing: 10'-0"
2.
3.
4.
5.
6.
7.
•
•
•
•
•
•
•
•
•
•
3
FOUNDATION PLAN VIEW
STREET / FRONT
O----------------------O
| |
| |
| |
O O
| |
| |
| |
O----------------------O
REAR
Legend: O = Concrete Pier Footing
Overall Dimensions: 20'-0" x 20'-0"
ELEVATION INFORMATION
FRONT ELEVATION
Width: 20'-0"
Approximate Peak Height: Per Manufacturer Specifications
Roof Style: Gable Roof
Open Front and Rear
SIDE ELEVATION
Depth: 20'-0"
Metal roof panel system
Steel support post framing
GENERAL CONSTRUCTION NOTES
Verify all dimensions in field prior to construction.
Call utility locate service before excavation.
Structure shall be installed per manufacturer installation instructions.
Maintain minimum required setbacks from property lines.
All fasteners and anchors exposed to weather shall be galvanized or corrosion resistant.
Footings shall bear on undisturbed native soil.
Remove loose or organic material from footing excavations.
Contractor/homeowner responsible for ensuring compliance with all applicable local codes.
Roof panels and framing members to be installed per manufacturer specifications.
Any deviations from manufacturer design may require additional engineering approval.
MANUFACTURER INFORMATION
PRODUCT
VEIKOUS 20 ft. W x 20 ft. D Carport Steel Car Canopy and Shelter
MODEL
PG0216-05-2
MANUFACTURER CLAIMED FEATURES
Powder-coated steel frame
Metal roof system
Approximate 35 PSF snow load rating
Freestanding configuration
REQUIRED ATTACHMENTS FOR SUBMITTAL
Attach the following documents to permit application:
Manufacturer installation instructions
Product specifications
Product listing sheet
Anchorage specifications
Foundation plan
Site plan
RECOMMENDED ADDITIONAL DOCUMENTATION
Due to local snow and wind requirements, PPRBD may request:
Additional anchorage details
Engineering verification
Snow load confirmation documentation
If requested by PPRBD, homeowner may need supplemental engineering approval for final permit issuance.
Requirements:
- Design a modern aesthetic double carport
- Utilize Veikous metal frame and metal panels
- Ensure structural integrity and compliance with local regulations
- Experience in carport or metal structure design is preferred
Please provide examples of previous work and a brief outline of your design approach.
BASIC BUILDING PLAN
Detached Metal Carport Permit Submittal
PROJECT INFORMATION
Project Address: 2306 Frontier Dr., Colorado Springs, CO 80911
Jurisdiction: Pikes Peak Regional Building Department (PPRBD)
Project Type: Detached Prefabricated Metal Carport
Structure Size: 20'-0" x 20'-0"
Total Area: 400 Square Feet
Manufacturer: VEIKOUS
Model Number: PG0216-05-2
Description: Metal Carport Steel Car Canopy and Shelter
SCOPE OF WORK
Install one (1) detached prefabricated metal carport structure on existing dirt driveway area adjacent to
residence. Structure to be anchored to individual concrete pier footings.
Installation to comply with:
2023 International Residential Code (IRC)
Pikes Peak Regional Building Department requirements
Manufacturer installation instructions
Local frost depth requirements
DESIGN CRITERIA
ITEM VALUE
Ground Snow Load 35 PSF
Frost Depth 30 Inches Minimum
Wind Exposure Exposure B
Occupancy Residential Accessory Structure
Roof Type Metal Panel Roof
Foundation Type Concrete Pier Footings
•
•
•
•
1
SITE PLAN
PROPERTY LAYOUT DESCRIPTION
Proposed carport located on LEFT side of residence.
Carport opening oriented toward street/front driveway.
Existing driveway area approximately 25'-0" wide x 35'-0" long.
Carport footprint approximately 20'-0" x 20'-0".
Structure to remain within property setbacks.
REQUIRED FIELD VERIFICATION
Homeowner/contractor to verify:
Exact property line locations
Utility locations prior to excavation
Easements
Final setbacks prior to installation
SCALED SITE PLAN SKETCH
SITE PLAN NOTES
Proposed carport to be installed on left side of residence.
•
•
•
•
•
•
•
•
•
1.
2
Carport opening faces street/front driveway.
Maintain minimum setbacks required by PPRBD zoning.
Verify property lines prior to construction.
Verify no easement conflicts exist.
Concrete pier footings to be centered under support posts.
Existing grade to remain generally unchanged.
APPROXIMATE DIMENSIONS
ITEM DIMENSION
Existing Driveway Width 25'-0"
Existing Driveway Length 35'-0"
Proposed Carport Width 20'-0"
Proposed Carport Depth 20'-0"
FOUNDATION PLAN
FOOTING LAYOUT
Provide six (6) concrete pier footings total.
FOOTING SPECIFICATIONS
Diameter: 16 Inches
Depth: 30 Inches Minimum Below Grade
Concrete Strength: 3000 PSI Minimum
Sonotube Forms Permitted
Bottom of footing to bear on undisturbed soil
ANCHORAGE
Install galvanized post anchor brackets or approved anchor system.
Anchors to comply with manufacturer requirements.
All hardware to be corrosion resistant.
FOOTING SPACING
(3) footings each side of structure. Approximate spacing:
Front to center footing: 10'-0"
Center to rear footing: 10'-0"
2.
3.
4.
5.
6.
7.
•
•
•
•
•
•
•
•
•
•
3
FOUNDATION PLAN VIEW
STREET / FRONT
O----------------------O
| |
| |
| |
O O
| |
| |
| |
O----------------------O
REAR
Legend: O = Concrete Pier Footing
Overall Dimensions: 20'-0" x 20'-0"
ELEVATION INFORMATION
FRONT ELEVATION
Width: 20'-0"
Approximate Peak Height: Per Manufacturer Specifications
Roof Style: Gable Roof
Open Front and Rear
SIDE ELEVATION
Depth: 20'-0"
Metal roof panel system
Steel support post framing
GENERAL CONSTRUCTION NOTES
Verify all dimensions in field prior to construction.
Call utility locate service before excavation.
Structure shall be installed per manufacturer installation instructions.
Maintain minimum required setbacks from property lines.
All fasteners and anchors exposed to weather shall be galvanized or corrosion resistant.
Footings shall bear on undisturbed native soil.
Remove loose or organic material from footing excavations.
Contractor/homeowner responsible for ensuring compliance with all applicable local codes.
Roof panels and framing members to be installed per manufacturer specifications.
Any deviations from manufacturer design may require additional engineering approval.
MANUFACTURER INFORMATION
PRODUCT
VEIKOUS 20 ft. W x 20 ft. D Carport Steel Car Canopy and Shelter
MODEL
PG0216-05-2
MANUFACTURER CLAIMED FEATURES
Powder-coated steel frame
Metal roof system
Approximate 35 PSF snow load rating
Freestanding configuration
REQUIRED ATTACHMENTS FOR SUBMITTAL
Attach the following documents to permit application:
Manufacturer installation instructions
Product specifications
Product listing sheet
Anchorage specifications
Foundation plan
Site plan
RECOMMENDED ADDITIONAL DOCUMENTATION
Due to local snow and wind requirements, PPRBD may request:
Additional anchorage details
Engineering verification
Snow load confirmation documentation
If requested by PPRBD, homeowner may need supplemental engineering approval for final permit issuance.