Prototype PCB Layout (4-Layer)
Budget: ₹12,500 – ₹37,500 INR
I have a prototype in development and now need the PCB laid out so I can move quickly to a physical test board. The job centres on a moderate-complexity stack-up (three to four copper layers) suitable for short-run fabrication.
Here is what I need from you:
• Capture the supplied schematic or recreate it cleanly in Altium, KiCad, or a comparable professional tool.
• Optimise component placement for easy probing during bench testing.
• Route all signals, power, and ground with sensible impedance control; follow standard DFM and DRC rules so the board sails through fab checks the first time.
• Generate the full manufacturing package—Gerbers, NC drill, pick-and-place, and a clear BOM with reference footprints and supplier links—ready for immediate upload to JLCPCB/PCBWay or the board house of your choice.
• Provide the editable source files alongside the production outputs.
I would like the complete, review-ready design within four weeks, giving us a little breathing room for any tweaks before sending it to the factory. If questions come up along the way, just ask; quick iteration is key for this prototype stage.
Here is what I need from you:
• Capture the supplied schematic or recreate it cleanly in Altium, KiCad, or a comparable professional tool.
• Optimise component placement for easy probing during bench testing.
• Route all signals, power, and ground with sensible impedance control; follow standard DFM and DRC rules so the board sails through fab checks the first time.
• Generate the full manufacturing package—Gerbers, NC drill, pick-and-place, and a clear BOM with reference footprints and supplier links—ready for immediate upload to JLCPCB/PCBWay or the board house of your choice.
• Provide the editable source files alongside the production outputs.
I would like the complete, review-ready design within four weeks, giving us a little breathing room for any tweaks before sending it to the factory. If questions come up along the way, just ask; quick iteration is key for this prototype stage.