High-Speed RF Mixed-Signal PCB Design
Budget: $150 – $250 CAD
I’m ready to move a complex, high-speed RF and digital concept from pin-map to production, and I need a KiCad specialist who can take full ownership of the schematic, multilayer layout, and manufacturing package. The board is expressly meant to be a multi-layer RF + digital PCB, so controlled impedance traces, tight length matching, and a clean RF ground strategy are non-negotiable. You will work strictly from my supplied BOM and pin-map, ensuring every net and footprint aligns perfectly with those source documents.
While the exact parts list is locked, the design mixes RF front-end blocks with high-speed digital logic—think amplifiers, filters, oscillators, and similar building-blocks—so you should be comfortable routing sensitive analog sections beside fast parallel buses and differential pairs.
Deliverables (all generated in KiCad 7 or later):
• Complete, ERC-clean schematic
• Multilayer PCB layout with defined stack-up and impedance notes
• Gerbers, drill files, pick-and-place, and BoM export, ready for fabrication/assembly
• PDF schematics and assembly drawings for reference
The work is complete when the project opens error-free in KiCad, all constraints are met, and the manufacturing files pass a standard DFM check. If you thrive on squeezing every last dB of isolation and every picosecond of timing accuracy out of a board, let’s get started. This project is Work-For-Hire
All IP, design files, and deliverables are the exclusive property of GSK Productions Inc
No reuse, resale, or disclosure of design content is permitted
NDA may be required before file access
While the exact parts list is locked, the design mixes RF front-end blocks with high-speed digital logic—think amplifiers, filters, oscillators, and similar building-blocks—so you should be comfortable routing sensitive analog sections beside fast parallel buses and differential pairs.
Deliverables (all generated in KiCad 7 or later):
• Complete, ERC-clean schematic
• Multilayer PCB layout with defined stack-up and impedance notes
• Gerbers, drill files, pick-and-place, and BoM export, ready for fabrication/assembly
• PDF schematics and assembly drawings for reference
The work is complete when the project opens error-free in KiCad, all constraints are met, and the manufacturing files pass a standard DFM check. If you thrive on squeezing every last dB of isolation and every picosecond of timing accuracy out of a board, let’s get started. This project is Work-For-Hire
All IP, design files, and deliverables are the exclusive property of GSK Productions Inc
No reuse, resale, or disclosure of design content is permitted
NDA may be required before file access