Electrical power and control simulink design
Budget: $30 – $100 USD
I am looking for an experienced freelancer to design an electrical power and control system using the MATLAB / SIMULINK. The freelancer will be required to design and troubleshoot the power and control system and perform analyses to assess performance. They should have advanced knowledge and experience of working with MATLAB and SIMULINK tools as well as power engineering experience. Any prior experience with power system simulation and relevant areas of engineering is highly desirable.
The project is based on the paper attached.
We want to design the proposed model shown in figure 2. The design is for a power system and a controller to stabilize the voltage when disturbance occures( fault induced delayed voltage recovery) this fault will be created and using the controllers in the pv farm we myst compensate for the reactive power drown by the inductive motores, the controller job is to inject the system in which the fault will be cleared
The challenging part is designing the controller as no parameters are given.
If it is not possible any controller that can clear the fault can be used.
Only results shown in part A and B are required.
The project is based on the paper attached.
We want to design the proposed model shown in figure 2. The design is for a power system and a controller to stabilize the voltage when disturbance occures( fault induced delayed voltage recovery) this fault will be created and using the controllers in the pv farm we myst compensate for the reactive power drown by the inductive motores, the controller job is to inject the system in which the fault will be cleared
The challenging part is designing the controller as no parameters are given.
If it is not possible any controller that can clear the fault can be used.
Only results shown in part A and B are required.