SolidWorks Block Mockup with Connectors

I need the block pictured in my reference recreated in SolidWorks so I can send it straight to the CNC mill for a mock-up. The blank starts at 1.5 × 3.75 × 5.5 in and those numbers must stay exact across every face—dimensional accuracy is the single most important point.

On the top surface sit three RF connectors (two BNC and one TNC); I will forward the supplier picture files so you can mate them precisely. A Harris/Thales battery recess goes on the bottom (red arrow in the photo) and a Motorola battery slot is cut into the large rear face (blue arrow). I will provide models for both fittings, so just drop them in and machine the surrounding pockets with practical clearances.

Please build the geometry parametrically—sketch-driven extrudes, cuts, fillets—so I can tweak sizes later. No surface-only bodies or imported dumb solids. A single .sldprt is perfect, but if you prefer to keep the purchased hardware separate, a simple assembly is fine.

Deliverable
• SolidWorks native file ready for CNC (part or assembly, plus any linked components).

No text or labels are required anywhere on the model. Send a quick screenshot of your first pass and I’ll confirm placement before you finish the detailing. Let me know if anything in the photo is unclear and I’ll supply additional views or measures right away.

Gwen colour is just to mask what can be avoided and that is not relevant in the modeling.

Motorola battery model: https://www.radio-solutions.co.uk/motorola-series-r7-battery-li-ion-ip68-2450mah.html

Harris / Thales battery model: https://www.epsilor.com/product/prc-152-prc-163/