Manual Fanuc Lathe G-Code Programming
Budget: ₹400 – ₹750 INR
My shop runs a Fanuc-controlled CNC lathe on pure job-work, so every day a different part is on the chuck. The work is done almost exclusively in mild steel, though stainless, EN8 and the occasional aluminium job appear as well. I need concise, hand-written G-code that lets the operator load the file, set the offsets and hit cycle start with complete confidence.
The drawings you will receive are 2-D and the parts sit in the “moderately complex” range: OD/ID roughing with G71-G72, finishing passes with G70, occasional G76 threading, plus safe approaches and retracts that clear the tool and avoid air-cutting. Cycle time matters, so code efficiency is as important as accuracy.
What you send back must include:
• A .txt or .nc program ready for Fanuc execution, annotated where useful
• A short tooling and offset sheet so the setter can match your code
• Your measured or estimated cycle time
When you reply, attach a sample of your past Fanuc turning code, outline your years on CNC lathes and quote your price per program. If everything checks out, I will keep the work flowing.
The drawings you will receive are 2-D and the parts sit in the “moderately complex” range: OD/ID roughing with G71-G72, finishing passes with G70, occasional G76 threading, plus safe approaches and retracts that clear the tool and avoid air-cutting. Cycle time matters, so code efficiency is as important as accuracy.
What you send back must include:
• A .txt or .nc program ready for Fanuc execution, annotated where useful
• A short tooling and offset sheet so the setter can match your code
• Your measured or estimated cycle time
When you reply, attach a sample of your past Fanuc turning code, outline your years on CNC lathes and quote your price per program. If everything checks out, I will keep the work flowing.