Amada Laser Programming Support

I need an experienced Amada laser programmer who can quickly turn my part drawings into production-ready code for cutting metal in the ¼"–½" range. All work is for steel and stainless only—no plastics or wood—so your settings, pierce routines, and kerf offsets must reflect that.

Parts arrive as DXF/SolidWorks files and are already dimension-checked; what I’m missing is the clean, efficiently nested NC program that will let my operators load it straight onto the machine and start cutting. I’m on a tight timeline and would like the first set of programs ASAP, ideally within the next day or two, with a short feedback loop for any tweaks.

Deliverables
• Amada-compatible NC code (M/N files) for each part number
• Nest layouts (if multiple parts per sheet) in PDF or native format
• Setup sheet listing material, gas, nozzle, pierce, and feed parameters
• Brief change log so I can track any revisions you make

Acceptance criteria
1. Programs cut cleanly on ¼"–½" steel/stainless with no rework.
2. Lead-ins/out minimise dross and comply with our edge-quality spec.
3. Nesting maximises sheet utilisation while keeping grain direction where noted.

If you’ve programmed on FO, LC, or ENSIS series machines and can hit tight turnarounds, let’s talk—files are ready to send immediately.