Civil engineer or structural engineer for house design stamp.

We are designing a house and we need a civil engineer or structural engineer to do the structural design of the house and stamp it. We want someone who is license in the state of Nevada.
Guidelines below:
STRUCTURAL PLANS and CALCULATIONS: (2 sets), if applicable, must be prepared by a Nevada registered professional civil or structural engineer. All plans and calculations must bear the engineer’s original stamp and signature.
 STRUCTURAL FOUNDATION PLANS/DETAILS: (3 sets), must include the following:
 Indicate concrete compressive strength and dimensional size and depth for all continuous and isolated spread footings and stem walls for the entire structure, including basement and window wells, if applicable
 Show minimum size, grade and number of reinforcing steel bars required for all continuous and isolated spread footings and stem walls for entire structure, including basement, if applicable
 Show all concrete embed anchors; bolts, hold downs, post base anchors, etc. and spacing, with adequate detailing
 Show thickness, reinforcing and vapor barrier requirements for all concrete slabs on grade
 Show material, strength, thickness and reinforcing for all masonry or concrete basement walls, if applicable
 STRUCTURAL FLOOR FRAMING PLANS/DETAILS: (3 sets), must include the following:
 Size, grade and spacing of posts, columns, beams, girders, ledgers and all connection details
 Size, grade, spacing of floor joists, or two (2) sets of engineered floor truss package, per our Engineered Wood Truss Guide
 Indicate material, grade, span index and anchorage of structural floor sheathing
 Provide floor opening details for stairs, shafts, etc.
 Exterior & interior stud wall framing members, grade, height and spacing
 Window and door header sizes
 Specify all metal framing hangers and anchors used
 Provide current ICC ES Evaluation Report numbers for all prefabricated framing components
 STRUCTURAL ROOF FRAMING PLANS/DETAILS: Three (3 sets), must include the following:
 Size, grade and spacing of posts, columns, beams, girders, ledgers and all connection details
 Size, grade, spacing of roof and ceiling joists or two (2) sets of engineered roof truss package, per our Engineered Wood Truss Guide
 Exterior & interior stud wall framing members, grade, height and spacing
 Attic access openings, including walkways to attic furnaces and air handlers
 Indicate material, grade, span index and anchorage of structural roof sheathing
 Window and door header sizes
 Specify all metal framing hangers and anchors used
BPG-182 5 2/17/2017
 Provide current ICC ES Evaluation Report numbers for all prefabricated framing components