Hospital Network Design (With IOT and VoIP) - CISCO Packet Tracer

Configuring a network in cisco packet tracer with the following specifications:

[I HAVE ATTACHED THE PACKET TRACER FILE TO WORK ON]

Creating a network topology using Cisco Packet Tracer.
Hierarchical Network Design.
Connecting Networking devices with Correct cabling.
Configuring Basic device settings.
Creating VLANs and assigning ports VLAN numbers.
Creating both data and voice VLANs and assigning ports VLAN numbers.
Subnetting and IP Addressing.
Configuring Inter-VLAN Routing on the Multilayer switches (Switch Virtual Interface).
Configuring a Dedicated DHCP Server device for Data to provide dynamic IP allocation.
Configuring Routers as DHCP server for Voice to provide IP Phones dynamic IP allocation.
Configuring SSH for secure Remote access.
Configuring OSPF as the routing protocol.
Configuring NAT Overload(Port Address Translation PAT).
Configuring standard and extended Access Control Lists ACL.
Configuring switch port security or Port-Security on the switches.
Configuring WLAN or wireless network (Cisco Access Point).
Configuring VoIP or Telephony service configuration in all routers.
Configuring Routing for VoIP or Dial peering configuration in all routers.
Host Device Configurations.
Configuring ISP routers.
Test and Verifying Network Communication.

SIMILAR PROJECTS:
https://gurutechnetworks.otombenard.com/assetsProject/project6
https://gurutechnetworks.otombenard.com/assetsProject/project8