Computer Network expert needed (CISCO PACKET TRACER)

Please if you are not a computer network expert and don't use cicso packet tracer, don't accept please

COMPUTER NETWORKS AND CISCO PACKET TRACER

Here are some questions you will have to provide correct answers

More details will be provided to you

a) Design the physical topology above in the packet tracer.
b) Secure the network devices with encrypted passwords and SSH remote access to the
devices. [All passwords must be cisco]
c) Configure the VLANs on L3Switch1 and enable the appropriate VTP modes to allow
seamless propagation of the VLANS through LAN devices. [Use UG as your VTP
domain and cisco as VTP passwords]
d) Configure the VLANs on L2Switch2 and enable the appropriate VTP modes to allow
seamless propagation of the VLANS through LAN devices.
e) Assign the access ports to the respective VLANs to provide network access to hosts.
f) Improve the bandwidth of the switch network by configuring LACP on the links Gig0/1-
Gig0/1 and Gig0/2 – Gig0/2 of the switches L3Switch1 and L2Switch1
g) Implement InterVlan routing on L3Switch1 to enable communication between hosts in
HR and Accounting.
h) Implement InterVlan routing on CORP router to enable communication between hosts in
Sales, Engineering and Marketing.
i) All other interfaces must be configured appropriately with the IP addresses and the
trunking protocol.
j) Configure the appropriate default routes and static routes to enable communications
across all VLANs of the topology.
k) Copy and paste the running configuration of each network device onto a Microsoft word
document and save it in your folder on the desktop.