Cisco project
Budget: €8 – €30 EUR
This is a small project for a imaginary company Datacorp
-Configure laptop1 and laptop2 with vlan100, asign the ips dynamically using the dhcp server which is also in vlan100
The ip range for vlan100 is 172.20.22.1-255 /24
The laptops should communicate with the DNS server to translate the ip 10.0.1.2 (Webserver) to www.datacorp.com which should only work in https
Meaning the laptops should be able to access the webpage trough router1
-Configure the controllers to have vlan110
-Configure switches with trunk (im guessing) and assign vlans in interfaces
-Configure router1 with ACL to block vlans from pinging each other
make router1 intervlan so it communicates from laptop vlan 100 with dns server vlan 120
router1 should have static routing to the webserver connected to router2
router1 must be connected to router2 with fiber and have media-type sfp
-Configure router2 and router1 without default routes
-Access point should be able to have laptops wirelessly connect to it and get vlan 100 assigned to them dynamicly
Controller3 will also be wirelessly connected to access point with vlan 120
All this is configured in the WLAN controller
the laptops must have a user and password to log into the WLAN
-Configure the second webserver in the yellow square to be accesible from the network as well as the internet
A PAT network address translation is set up on the firewall for the private IP addresses of the company network.
The IP address 194.154.32.2/30 is available for the connection to the Internet Service Provider.
Public IP addresses are also used for the configuration in the yellow square, The IP address range
194.154.91.184/29 is available for this purpose.
-Configure the first webserver to be accessible from the Internet via a VPN connection.
vlan 110 172.20.23.1-63 255.255.255.192
vlan 120 172.20.23.65-79 255.255.255.240
WAN 172.20.23.81-83 255.255.255.252
-Configure laptop1 and laptop2 with vlan100, asign the ips dynamically using the dhcp server which is also in vlan100
The ip range for vlan100 is 172.20.22.1-255 /24
The laptops should communicate with the DNS server to translate the ip 10.0.1.2 (Webserver) to www.datacorp.com which should only work in https
Meaning the laptops should be able to access the webpage trough router1
-Configure the controllers to have vlan110
-Configure switches with trunk (im guessing) and assign vlans in interfaces
-Configure router1 with ACL to block vlans from pinging each other
make router1 intervlan so it communicates from laptop vlan 100 with dns server vlan 120
router1 should have static routing to the webserver connected to router2
router1 must be connected to router2 with fiber and have media-type sfp
-Configure router2 and router1 without default routes
-Access point should be able to have laptops wirelessly connect to it and get vlan 100 assigned to them dynamicly
Controller3 will also be wirelessly connected to access point with vlan 120
All this is configured in the WLAN controller
the laptops must have a user and password to log into the WLAN
-Configure the second webserver in the yellow square to be accesible from the network as well as the internet
A PAT network address translation is set up on the firewall for the private IP addresses of the company network.
The IP address 194.154.32.2/30 is available for the connection to the Internet Service Provider.
Public IP addresses are also used for the configuration in the yellow square, The IP address range
194.154.91.184/29 is available for this purpose.
-Configure the first webserver to be accessible from the Internet via a VPN connection.
vlan 110 172.20.23.1-63 255.255.255.192
vlan 120 172.20.23.65-79 255.255.255.240
WAN 172.20.23.81-83 255.255.255.252