Custom PCB for Very Simple Dual Pump Control
Budget: $30 – $250 USD
I need a small, custom-designed PCB board to control two small pumps for a liquid distribution system. The pumps will handle water and will be operated using a manual switch to start or stop their function. The pumps are rated 3-4.5v and 150-250mA (DC). The power supply should come from a wall voltage adapter and should be able to be mounted vertical/perpendicular to the board, as the board will be on its side.
The deliverable should include the complete PCB design, ready for manufacturing, along with a basic schematic showing the wiring and components used. Please ensure the design is optimized for small-scale, efficient operation. Components should be commonly available and cost-effective.
I have previously created a schematic that I believe should be sufficient. Please let me know if you have any questions or suggestions for improvements during the process.
The deliverable should include the complete PCB design, ready for manufacturing, along with a basic schematic showing the wiring and components used. Please ensure the design is optimized for small-scale, efficient operation. Components should be commonly available and cost-effective.
I have previously created a schematic that I believe should be sufficient. Please let me know if you have any questions or suggestions for improvements during the process.