Fully Automatic Colloidal Silver Generator
Budget: $250 – $750 USD
Colloidal Silver Generator The main idea is to build the most advanced colloidal silver generator available today. User might have no knowledge of chemistry or electronics so, these skills should not be required to make perfect colloidal silver every time. Generator might contain a microprocessor unit and at least a 3 inch touch screen which brings computer controlled precision and versatility to the process and greatly simplifies operation.
it Will offer unrivaled accuracy and versatility together with unparalleled ease of use. Its internal computer together with its custom hardware Will precisely measure the amount of silver removed from the electrode so the generator should knows exactly when to turn off power to the electrodes giving the exact amount (mg/L) of silver selected from its menu.
Should be 'Set it and Forget it' simple.
The intuitive menu based touchscreen or mobile app will allow the user to choose the desired strength of and amount of colloidal silver to make.
This generator will make both ionic silver (clear) and metallic colloidal silver (yellow) it may require the use of certain some additives like reducing agents to be able to make colloidal silver strengths from 20 ppm and up to 320 ppm. (may require an optional heated magnetic stirrer unit with hotplate for best results)
Ionic Silver (clear) can be made consistently with or without the use of any electrolyte (commonly used for improving water conductivity), this will be possible because the generator will performe calculus operation integrating the current/time curve.
May be based on a bare atmega processor or even be developed on an arduino platform, the software should run several processes simultaneously including an ammeter, voltmeter, touch screen keys, time remaining clock, current/time integrator, and audible end of run indicator. The current limiter could be changed during a run. It may run on 9 volts, and the current may be driven by an op-amp.
Setup should be easy using the touch screen:
Menu Choices:
• Ma (current): 1 to 15 in 1 mA steps allows optimum current for size of the positive electrode (anode). • Ppm: 20, 30, 40, 80, 120, 160, 240, 320 •
Water Amount: 1 Cup, 1 Pint, 1 Pint Mason Jar, 1 Qt, 1 Qt Mason Jar, 2 Qt, 2Qt Mason Jar, 1 Gal, 250 ml, 500 ml, 1 L, 2 L, 4 L.
• Alert Tone: Off, Short, Long
The colloidal silver generator will remembers your PPM, Volume, and Current settings between runs and between power ups, saving setup time so you can just plug it in and go.
Metering: Once the START button is pressed, the screen should show: current, voltage, estimated time remaining, and progress indicator.
When the run is finished, the generator will beep letting you know it is done.
Unlike some colloidal silver generators, this one should not sit on top of the flask, so it can be used with hot processing without the danger of heat or water vapor damaging the electronics.
The generator should work with:
• 1 9 Volt Wall transformer 110 to 240 VAC, 50 or 60 Hz. (as the ones used for laptops) • 1 pair of removable Color Coded Electrode Lead wires
it Will offer unrivaled accuracy and versatility together with unparalleled ease of use. Its internal computer together with its custom hardware Will precisely measure the amount of silver removed from the electrode so the generator should knows exactly when to turn off power to the electrodes giving the exact amount (mg/L) of silver selected from its menu.
Should be 'Set it and Forget it' simple.
The intuitive menu based touchscreen or mobile app will allow the user to choose the desired strength of and amount of colloidal silver to make.
This generator will make both ionic silver (clear) and metallic colloidal silver (yellow) it may require the use of certain some additives like reducing agents to be able to make colloidal silver strengths from 20 ppm and up to 320 ppm. (may require an optional heated magnetic stirrer unit with hotplate for best results)
Ionic Silver (clear) can be made consistently with or without the use of any electrolyte (commonly used for improving water conductivity), this will be possible because the generator will performe calculus operation integrating the current/time curve.
May be based on a bare atmega processor or even be developed on an arduino platform, the software should run several processes simultaneously including an ammeter, voltmeter, touch screen keys, time remaining clock, current/time integrator, and audible end of run indicator. The current limiter could be changed during a run. It may run on 9 volts, and the current may be driven by an op-amp.
Setup should be easy using the touch screen:
Menu Choices:
• Ma (current): 1 to 15 in 1 mA steps allows optimum current for size of the positive electrode (anode). • Ppm: 20, 30, 40, 80, 120, 160, 240, 320 •
Water Amount: 1 Cup, 1 Pint, 1 Pint Mason Jar, 1 Qt, 1 Qt Mason Jar, 2 Qt, 2Qt Mason Jar, 1 Gal, 250 ml, 500 ml, 1 L, 2 L, 4 L.
• Alert Tone: Off, Short, Long
The colloidal silver generator will remembers your PPM, Volume, and Current settings between runs and between power ups, saving setup time so you can just plug it in and go.
Metering: Once the START button is pressed, the screen should show: current, voltage, estimated time remaining, and progress indicator.
When the run is finished, the generator will beep letting you know it is done.
Unlike some colloidal silver generators, this one should not sit on top of the flask, so it can be used with hot processing without the danger of heat or water vapor damaging the electronics.
The generator should work with:
• 1 9 Volt Wall transformer 110 to 240 VAC, 50 or 60 Hz. (as the ones used for laptops) • 1 pair of removable Color Coded Electrode Lead wires