i need a cad designer
Budget: $30 – $250 USD
PROJECT IS DUE IN 7 HOURS
A worm gearset is needed to reduce the speed of an electric motor from 1800 rpm to 50 rpm. Strength considerations
require that 12-pitch gears be used, and it is desired that the set be self-locking. Select a set that accomplishes this task.
Then in order to couple the output of the worm gear, Design a gear train that yields a train value of +50:1. From interference criteria, no gear should have fewer than 15 teeth and, due to size restrictions, no gear can have more than 75 teeth
The output of the drive train will drive a crank shaper that will generate a 3 to 1 rapid return system moving a slider with a total displacement of 6 inches.
Design the 3 phases of the project, including:
Worm Gear
Drive Train
Crank Shaper
A worm gearset is needed to reduce the speed of an electric motor from 1800 rpm to 50 rpm. Strength considerations
require that 12-pitch gears be used, and it is desired that the set be self-locking. Select a set that accomplishes this task.
Then in order to couple the output of the worm gear, Design a gear train that yields a train value of +50:1. From interference criteria, no gear should have fewer than 15 teeth and, due to size restrictions, no gear can have more than 75 teeth
The output of the drive train will drive a crank shaper that will generate a 3 to 1 rapid return system moving a slider with a total displacement of 6 inches.
Design the 3 phases of the project, including:
Worm Gear
Drive Train
Crank Shaper