Scale model design CP Stoney Creek Bridge -- 2
Budget: $30 – $250 CAD
Design a 1:160 model of the CP Stoney Creek Bridge, in Fusion 360. Will eventually be 3D printed on a resin printer. Finer details required - cross-members, railings, etc. See 3D render images of another bridge project for a sense of quality expected. No need to design the track - that part is commercially available. Dimensions image gives prototype sizing. Design to match the pictures, not the line drawing (line drawing is an older version of the bridge).
Scale measurements: Bridge arch should measure 64cm long, 7 cm wide. Total height is flexible, and can be determined as you draw up the rest of the bridge. Inset for the tracks/ties between the walkways is 26mm wide, and 1.4mm deep.
You'll deliver the Fusion360 files with distinct bodies/objects that would allow me to export any portion of the bridge for 3D printing. I'll own the IP for the Fusion360 files and any derivatives from them.
Scale measurements: Bridge arch should measure 64cm long, 7 cm wide. Total height is flexible, and can be determined as you draw up the rest of the bridge. Inset for the tracks/ties between the walkways is 26mm wide, and 1.4mm deep.
You'll deliver the Fusion360 files with distinct bodies/objects that would allow me to export any portion of the bridge for 3D printing. I'll own the IP for the Fusion360 files and any derivatives from them.