PVC CAD Design for Thick Liquid Transport
Budget: €30 – €250 EUR
I need a skilled CAD designer with engineering knowledge to optimize a PVC design based on my drawing. The object will be used for industrial equipment to transport thick liquids.
Requirements:
- Expertise in CAD software
- Experience with PVC design
- Understanding of fluid transport mechanics
- Engineering background is a plus
Please review the attached rough idea and provide your best design solution.
------------------
There is a liquid of between 200–2000+ cP coming out of the 2 inch pipe at the top.
The liquid is coming out at a pressure of 60–145 psi
We want the liquid to go a maximum of 2.75ft on the ground. The downpipe is about 1.5m above the ground. Please come up with the best design for this to allow the maximum liquid to be dispersed on the ground between the two wheels as seen in the sketch.
In the sketch x = 1m
and y = 2m
Requirements:
- Expertise in CAD software
- Experience with PVC design
- Understanding of fluid transport mechanics
- Engineering background is a plus
Please review the attached rough idea and provide your best design solution.
------------------
There is a liquid of between 200–2000+ cP coming out of the 2 inch pipe at the top.
The liquid is coming out at a pressure of 60–145 psi
We want the liquid to go a maximum of 2.75ft on the ground. The downpipe is about 1.5m above the ground. Please come up with the best design for this to allow the maximum liquid to be dispersed on the ground between the two wheels as seen in the sketch.
In the sketch x = 1m
and y = 2m