Mixer CAD drawing

Job ID: 30891086

Budget: $250 – $750 AUD

I need a CAD drawing done for a mixer we are making. We need the CAD drawings for components to be laser cut.

I have attached a sketchup file showing basic configuration of the mixer. This very basic sketch only shows one of the 16 mix blades in place.

I have also attached a couple of images showing the device I am copying, to give a concept. It is a mixer style we have been using for years, but we need to build some stronger ones.

The mix blades are to be laser or waterjet cut from 50mm NB 316 stainless Schedule 40 (60.3 OD, 3.91 Wall thickness)

The centre drive plate is to have the profile of the mix blades cut to allow the blades to be "fed" through, so they protrude either side. Please note the sketch is very basic - the centre plate is drawn with 130mm OD and 82mm ID - it should be 70mm ID, and the point of junction of the drive "spokes" should have a 15mm radius.
Centre plate material is 6mm thick 316 Stainless Steel

The mix blades are to have a "notch" cut at each end to reduce the width of the blade, giving a "tongue" to fit into the end plates.

There are to be 16 mix blades equally spaced around the diameter of the mixer.

The end plates are to have the reduced profile at the end mix blades laser cut to allow them to fit, allowing tig welding at the end.
The point of junction of the drive "spokes" on the end plates should also have a 15mm radius
End plate material 4mm thick 316 Stainless Steel

Overall length from end plate to end plate is 220mm

Drive shaft is 12mm solid 316 stainless Steel Bar
Related categories: CAD/CAM Solidworks AutoCAD Product Design 3D Modelling