Marine Steel Structure Load Assessment
Budget: $250 – $750 USD
I have full drawings and material specifications for a large steel structural framework that will be installed offshore. What I need from you is a short-form set of design guidelines—essentially the practical numbers the installers and operators can use without trawling through the spec sheets.
Scope
• Review the provided PDFs
• Translate the existing specs into clear guidance on:
– allowable axial, shear and bending loads
– torque limits for all bolted or welded connections
– environmental constraints that matter most in salt-water exposure (corrosion allowances, wave impact, wind pressure, temperature ranges).
• Identify which load categories (static, dynamic, impact) should govern the design; I am relying on your expertise here.
Format & Deliverable
A concise PDF (1-2 pages plus any calcs in an appendix) delivered after a 1–2 hour screenshare or call where we walk through assumptions. I am comfortable with hand calculations, not sure if needed, but FEA snapshots from software like ANSYS or STAAD.Pro, or a blend—whatever lets us reach defensible numbers quickly.
Acceptance
I will sign off once the guideline clearly lists:
• Maximum permissible loads and torques with safety factors applied.
• Stated environmental limitations.
• Short note on governing standards and load cases used.
If this time-boxed consultation suits you, let’s lock a slot and I’ll forward the drawings immediately.
Scope
• Review the provided PDFs
• Translate the existing specs into clear guidance on:
– allowable axial, shear and bending loads
– torque limits for all bolted or welded connections
– environmental constraints that matter most in salt-water exposure (corrosion allowances, wave impact, wind pressure, temperature ranges).
• Identify which load categories (static, dynamic, impact) should govern the design; I am relying on your expertise here.
Format & Deliverable
A concise PDF (1-2 pages plus any calcs in an appendix) delivered after a 1–2 hour screenshare or call where we walk through assumptions. I am comfortable with hand calculations, not sure if needed, but FEA snapshots from software like ANSYS or STAAD.Pro, or a blend—whatever lets us reach defensible numbers quickly.
Acceptance
I will sign off once the guideline clearly lists:
• Maximum permissible loads and torques with safety factors applied.
• Stated environmental limitations.
• Short note on governing standards and load cases used.
If this time-boxed consultation suits you, let’s lock a slot and I’ll forward the drawings immediately.