Fabrication Drawings
Budget: $30 – $250 AUD
I need fabrication drawings for a metal project. The drawings should include measurements and I do not need any assembly instructions included. I'm aiming for a high-quality and accurate final product, so attention to detail is important. I'm open to suggestions for how best to proceed and look forward to hearing your ideas.
I'm wanting to fabricate a counterweight boom gate, mounted on concrete blocks. open to design ideas but have attached something similar to what we need.
The concrete blocks are 1200mmx1200mmx1050mm
The boom is made of;
Aluminium Rectangular Tube Hollow with Radius Corners
Part Number A mm B mm T mm R mm L mm Alloy/Temper Nominal Mass/Piece
RR80404MI6.5IL 80.0 40.0 4.0 6.0 6500 6082T6 15.515
RR70303MI6.5L 70.0 30.0 3.0 1.4 6500 6060T5 9.873
These will be the telescopic pieces with a 500mm internal overlap when fully extended to 12m.
the hinge and counterweight are to be made out of mild steel.
I'm wanting to fabricate a counterweight boom gate, mounted on concrete blocks. open to design ideas but have attached something similar to what we need.
The concrete blocks are 1200mmx1200mmx1050mm
The boom is made of;
Aluminium Rectangular Tube Hollow with Radius Corners
Part Number A mm B mm T mm R mm L mm Alloy/Temper Nominal Mass/Piece
RR80404MI6.5IL 80.0 40.0 4.0 6.0 6500 6082T6 15.515
RR70303MI6.5L 70.0 30.0 3.0 1.4 6500 6060T5 9.873
These will be the telescopic pieces with a 500mm internal overlap when fully extended to 12m.
the hinge and counterweight are to be made out of mild steel.