Construction for round dyring silo
Budget: €750 – €1,500 EUR
We need higher capacity for peanut IN-Shell drying
Therefore we need drying silos.
We already have glass fiber reinforced rings - inside diameter = 2m - wall thickness = 1cm - height = 2,7m
Those rings are at the top and the bottom open
What we need - see picture Sample1 (1 Red - glass fiber reinforced rings | 2 green - outlet) - we need the second green part
We need the base construction under these rings (to put the rings on the top), on the side there should be place for an air blower - the conection therefore should be 30cm in diameter
Sample see picture - Sample2
Also a electrical controlled moveable floor for outlet - 45° - See picture Sample3 and Sample4
The maximum load will be 2,5 tons.
Those silo will be placed on a flat concrete ground.
You should use everykind of CNC laser cutter (bed and tube laser) also CNC milling and CNC Turning for construction.
I hope everything is clear otherwise pls pn me.
Therefore we need drying silos.
We already have glass fiber reinforced rings - inside diameter = 2m - wall thickness = 1cm - height = 2,7m
Those rings are at the top and the bottom open
What we need - see picture Sample1 (1 Red - glass fiber reinforced rings | 2 green - outlet) - we need the second green part
We need the base construction under these rings (to put the rings on the top), on the side there should be place for an air blower - the conection therefore should be 30cm in diameter
Sample see picture - Sample2
Also a electrical controlled moveable floor for outlet - 45° - See picture Sample3 and Sample4
The maximum load will be 2,5 tons.
Those silo will be placed on a flat concrete ground.
You should use everykind of CNC laser cutter (bed and tube laser) also CNC milling and CNC Turning for construction.
I hope everything is clear otherwise pls pn me.