Zigbee Network using Silabs Mighty Gecko Devices
Budget: $250 – $750 AUD
I have a project that requires using Silabs MGM210P Mighty Gecko Modules to provide a Zigbee network to collect data.
The System on Chip (SOC) code for the Coordinator and the Router is required using Simplicity Studio 5
The Silabs MGM210P Mighty Gecko Modules is to be used for the Coordinator and the Router
The Router module functions are
1) Power up
2) Connect to the Coordinator
6) Send a custom packet of data to the Coordinate
7) Receive acknowledge from Coordinator
8) Wait 10 seconds
Repeat process
The Coordinator module functions are
1) Connect to the Router and form a network when the router powers up
2) Receive the data packet from the Router
3) Respond to the Router with Acknowledgement data packet
4) Output packet on the serial port / usb
5) Wait for next packet
Simplicity Studio has the tools for the project including a compiler for the Mighty Gecko Parts
The System on Chip (SOC) code for the Coordinator and the Router is required using Simplicity Studio 5
The Silabs MGM210P Mighty Gecko Modules is to be used for the Coordinator and the Router
The Router module functions are
1) Power up
2) Connect to the Coordinator
6) Send a custom packet of data to the Coordinate
7) Receive acknowledge from Coordinator
8) Wait 10 seconds
Repeat process
The Coordinator module functions are
1) Connect to the Router and form a network when the router powers up
2) Receive the data packet from the Router
3) Respond to the Router with Acknowledgement data packet
4) Output packet on the serial port / usb
5) Wait for next packet
Simplicity Studio has the tools for the project including a compiler for the Mighty Gecko Parts