Linux Embedded specialist of ARM and Xilinx architectures -- 2
Budget: $30 – $60 USD
Hi
I'm new to Linux Embedded environment and looking for a specialist in ARM environment who able to support and guide me when I stock (like now) or some theoretical / technical questions will pop up. I think for the beginning 2-4 hours per week it will be fine. This session is going to be for at least a few months, so I’d like to share with you one of my challenges and see if its fit to you.
My current project: Bringing up on my custom board a Linux Image, my custom board very similar to the ZCU 106 Ultrascale+ MPSoC board.
What I've already achieved:
I’ve generated the BOOT.BIN which contains: fsbl, uboot, bl31, pmufw, system.bit and u-boot.
When I program the flash with this BOOT.BIN the image run succesfully, I can execute a u-boot command shell (if I don’t stop in u-boot prompt, its throws a Error since no any kernel or Device Tree been flashed as well)
My problem is when I’m trying to generate the BOOT.BIN which includes the image.ub, during the build – Error occured:
[ERROR] : Section image.ub.0 offset of 0x140000 overlaps with prior section end address of 8805C0
How do I fix it? Any other ways to run the linux Image (image.ub) ?
Extra Info:
1. My costumed board is working properly and there is no any HW issue since I'm able to run on it a vxWorks 7 image.
2. I use petalinux 2019.2 version and Vitis 2019.2
3. I use the Xilinx tool: Platform Cable USB II for programming and debug.
But please! I’d like to get bids just from a fellows who has a strong knowledge and experience with such a technology: Yocto project, Xilinx boards, petalinux 2019.2 and Platform Cable USB II.
If you think you can help me and you are available for this mission in the next few days - I'd like to hear from you.
I'm new to Linux Embedded environment and looking for a specialist in ARM environment who able to support and guide me when I stock (like now) or some theoretical / technical questions will pop up. I think for the beginning 2-4 hours per week it will be fine. This session is going to be for at least a few months, so I’d like to share with you one of my challenges and see if its fit to you.
My current project: Bringing up on my custom board a Linux Image, my custom board very similar to the ZCU 106 Ultrascale+ MPSoC board.
What I've already achieved:
I’ve generated the BOOT.BIN which contains: fsbl, uboot, bl31, pmufw, system.bit and u-boot.
When I program the flash with this BOOT.BIN the image run succesfully, I can execute a u-boot command shell (if I don’t stop in u-boot prompt, its throws a Error since no any kernel or Device Tree been flashed as well)
My problem is when I’m trying to generate the BOOT.BIN which includes the image.ub, during the build – Error occured:
[ERROR] : Section image.ub.0 offset of 0x140000 overlaps with prior section end address of 8805C0
How do I fix it? Any other ways to run the linux Image (image.ub) ?
Extra Info:
1. My costumed board is working properly and there is no any HW issue since I'm able to run on it a vxWorks 7 image.
2. I use petalinux 2019.2 version and Vitis 2019.2
3. I use the Xilinx tool: Platform Cable USB II for programming and debug.
But please! I’d like to get bids just from a fellows who has a strong knowledge and experience with such a technology: Yocto project, Xilinx boards, petalinux 2019.2 and Platform Cable USB II.
If you think you can help me and you are available for this mission in the next few days - I'd like to hear from you.