IFC to MEP/Structural Shop Drawings
Budget: $250 – $750 USD
I need my current IFC package translated into fully coordinated MEP shop drawings that follow standard UAE practice. You will receive the IFC files for all mechanical, electrical, and plumbing disciplines and return construction-ready sheets—layouts, sections, details, and schedules—clear enough for site teams and compliant with local authorities (DEWA, ADM, Dubai Municipality, etc.).
Speed matters; I’m aiming for the first complete set as soon as realistically possible, so phased hand-offs are welcome if they accelerate overall delivery. Native CAD/BIM files (DWG, RVT, or similar) plus PDFs are required, with clear layer naming, dimensioning, and annotation standards consistent with UAE conventions.
Proven experience converting IFC to shop drawings for projects in the Emirates is the main selection factor, so highlight comparable work and the tools you typically use. If you are confident working under tight timelines and can meet local code expectations without extensive back-and-forth, I’d like to start immediately.
1. Structural Shop Drawings
• General Arrangement Plans (foundation, floor slabs, roof slab, superstructure layout).
• Reinforcement Details (foundation, columns, beams, slabs, walls).
• Sections & Elevations (with reinforcement detailing).
• Embedment & Blockout Details (anchor bolts, sleeves, openings, trench recesses).
• Construction/Expansion Joints Layout.
• Shop Drawing Notes (per ADM & BS/ACI standards).
2. Electrical Shop Drawings
• Single Line Diagrams (SLD) for LV panels, pump motors, and essential loads.
• Power Layouts (equipment rooms, pump rooms, control panels).
• Cable Routing & Trays (trench/cable tray routing, earthing).
• Equipment Termination Details (pumps, MCC, control panels).
• Schedules (cable schedule, DB schedule, load schedule).
• Earthing & Bonding Layouts.
3. HVAC Shop Drawings
• HVAC Equipment Layout (pump station ventilation, AC units if applicable).
• Ducting Layouts (supply, exhaust, fresh air).
• Duct Sections & Sizes (with CFM and velocity as per ADM & ASHRAE).
• Air Balancing Diagrams.
• Equipment Installation Details (fans, dampers, louvers, silencers).
4. Lighting Shop Drawings
• Lighting Layouts (internal & external, with lux calculation compliance).
• Lighting Control Layouts (switches, control panels, sensors).
• Wiring & Conduit Routing.
• Lighting Fixture Schedules (with ADM approved references).
5. Superstructure Structural Shop Drawings
(Separate from general structural because client has split this package)
• Pump Station Superstructure Layout.
• Column & Beam Reinforcement Detailing.
• Roof Slab Detailing & Equipment Support Frames.
• Sections, Details & Notes (per ADM structural codes).
6. Drainage System Shop Drawings
• Drainage Layout Plans (internal and external).
• Pipe Routing & Slopes (with invert levels, manholes).
• Manhole & Inspection Chamber Details.
• Connection to Main Sewer Line (including ADM standard details).
• Drainage Schedules (pipe, manhole, fittings).
7. Mechanical Shop Drawings
(other than HVAC – typically pumps, piping & mechanical equipment)
• Pump Room Piping Layout (suction, discharge, bypass, valves).
• Piping Isometric Drawings.
• Pump Installation Details (foundation, alignment, supports).
• Valve Chamber Details.
• Pipe Support & Hanger Layouts.
8. Water Supply Shop Drawings
• Water Supply Layouts (internal & external, incoming line, tanks if any).
• Riser Diagrams.
• Pipe Routing & Levels.
• Valve & Fittings Layout.
• Connection to Municipality Supply (as per ADM standards).
• Water Supply Schedules (pipe, fittings, valves, equipment).
⚠️ ADM Compliance Notes:
• All shop drawings must be prepared on provided title blocks by us
• Drawings must include coordinate references, approved materials list, and construction notes.
• Submissions typically require DWG + PDF formats and cross-references with IFC drawing numbers.
• A Drawing Register (with submission dates & revision log) must accompany the package.
Speed matters; I’m aiming for the first complete set as soon as realistically possible, so phased hand-offs are welcome if they accelerate overall delivery. Native CAD/BIM files (DWG, RVT, or similar) plus PDFs are required, with clear layer naming, dimensioning, and annotation standards consistent with UAE conventions.
Proven experience converting IFC to shop drawings for projects in the Emirates is the main selection factor, so highlight comparable work and the tools you typically use. If you are confident working under tight timelines and can meet local code expectations without extensive back-and-forth, I’d like to start immediately.
1. Structural Shop Drawings
• General Arrangement Plans (foundation, floor slabs, roof slab, superstructure layout).
• Reinforcement Details (foundation, columns, beams, slabs, walls).
• Sections & Elevations (with reinforcement detailing).
• Embedment & Blockout Details (anchor bolts, sleeves, openings, trench recesses).
• Construction/Expansion Joints Layout.
• Shop Drawing Notes (per ADM & BS/ACI standards).
2. Electrical Shop Drawings
• Single Line Diagrams (SLD) for LV panels, pump motors, and essential loads.
• Power Layouts (equipment rooms, pump rooms, control panels).
• Cable Routing & Trays (trench/cable tray routing, earthing).
• Equipment Termination Details (pumps, MCC, control panels).
• Schedules (cable schedule, DB schedule, load schedule).
• Earthing & Bonding Layouts.
3. HVAC Shop Drawings
• HVAC Equipment Layout (pump station ventilation, AC units if applicable).
• Ducting Layouts (supply, exhaust, fresh air).
• Duct Sections & Sizes (with CFM and velocity as per ADM & ASHRAE).
• Air Balancing Diagrams.
• Equipment Installation Details (fans, dampers, louvers, silencers).
4. Lighting Shop Drawings
• Lighting Layouts (internal & external, with lux calculation compliance).
• Lighting Control Layouts (switches, control panels, sensors).
• Wiring & Conduit Routing.
• Lighting Fixture Schedules (with ADM approved references).
5. Superstructure Structural Shop Drawings
(Separate from general structural because client has split this package)
• Pump Station Superstructure Layout.
• Column & Beam Reinforcement Detailing.
• Roof Slab Detailing & Equipment Support Frames.
• Sections, Details & Notes (per ADM structural codes).
6. Drainage System Shop Drawings
• Drainage Layout Plans (internal and external).
• Pipe Routing & Slopes (with invert levels, manholes).
• Manhole & Inspection Chamber Details.
• Connection to Main Sewer Line (including ADM standard details).
• Drainage Schedules (pipe, manhole, fittings).
7. Mechanical Shop Drawings
(other than HVAC – typically pumps, piping & mechanical equipment)
• Pump Room Piping Layout (suction, discharge, bypass, valves).
• Piping Isometric Drawings.
• Pump Installation Details (foundation, alignment, supports).
• Valve Chamber Details.
• Pipe Support & Hanger Layouts.
8. Water Supply Shop Drawings
• Water Supply Layouts (internal & external, incoming line, tanks if any).
• Riser Diagrams.
• Pipe Routing & Levels.
• Valve & Fittings Layout.
• Connection to Municipality Supply (as per ADM standards).
• Water Supply Schedules (pipe, fittings, valves, equipment).
⚠️ ADM Compliance Notes:
• All shop drawings must be prepared on provided title blocks by us
• Drawings must include coordinate references, approved materials list, and construction notes.
• Submissions typically require DWG + PDF formats and cross-references with IFC drawing numbers.
• A Drawing Register (with submission dates & revision log) must accompany the package.