Spacious Apartment Design - Maximize Utilization
Budget: $10 – $30 USD
# Final Apartment Design Requirements
## 1. Plot Information
* **Plot Size:** 40 ft × 68 ft
* **Front:** Road-facing
* **Rear:** Dead wall (commercial side)
* **Left Side Passage:** 2.5 ft
* **Right Side Passage:** 2.5 ft
## 2. Ventilation & Boundary Requirements
* The **rear wall is a dead wall** and must remain completely blind.
* **No windows, doors, balconies, kitchen exhausts, or toilet ventilation** are allowed on the rear side.
* Kitchens, bathrooms, and bedrooms should be ventilated from the **left or right side passages**.
* The **2.5 ft left-side passage may be absorbed into corner rooms if required** to maximize usable space.
* The **2.5 ft right-side passage** should be retained for ventilation and windows where needed.
## 3. Ground Floor Requirements
* Provide **one large front parking area**.
* Design **2 independent 2-bedroom apartments**.
### Each Ground Floor Apartment Shall Include:
* 1 Master Bedroom with an attached bathroom.
* 1 Standard Bedroom.
* 1 Common Bathroom.
* 1 Kitchen.
* 1 Living/Dining Area.
* Practical layout with minimal wasted space.
## 4. First Floor Requirements
* Design **3 independent 2-bedroom apartments**.
### Each First Floor Apartment Shall Include:
* 1 Master Bedroom with an attached bathroom.
* 1 Standard Bedroom.
* 1 Common Bathroom.
* **Total Bathrooms: 2**
* 1 attached master bathroom.
* 1 common bathroom.
* 1 Kitchen.
* 1 Living/Dining Area.
* Access through a central lobby or efficient circulation space.
## 5. General Design Guidelines
* Maximize usable carpet area and room sizes.
* Minimize unnecessary corridors and dead space.
* Provide wardrobe space in bedrooms.
* Ensure furniture placement is practical and comfortable.
* Keep the design simple, symmetrical, and cost-effective to construct.
* Maintain good natural light and cross-ventilation using the available side passages.
* Do not place any openings on the rear dead wall.
## 6. Design Objective
The final design should provide spacious, functional, and rental-friendly apartments while maximizing the use of the available plot area and complying with the ventilation and boundary constraints.
## 1. Plot Information
* **Plot Size:** 40 ft × 68 ft
* **Front:** Road-facing
* **Rear:** Dead wall (commercial side)
* **Left Side Passage:** 2.5 ft
* **Right Side Passage:** 2.5 ft
## 2. Ventilation & Boundary Requirements
* The **rear wall is a dead wall** and must remain completely blind.
* **No windows, doors, balconies, kitchen exhausts, or toilet ventilation** are allowed on the rear side.
* Kitchens, bathrooms, and bedrooms should be ventilated from the **left or right side passages**.
* The **2.5 ft left-side passage may be absorbed into corner rooms if required** to maximize usable space.
* The **2.5 ft right-side passage** should be retained for ventilation and windows where needed.
## 3. Ground Floor Requirements
* Provide **one large front parking area**.
* Design **2 independent 2-bedroom apartments**.
### Each Ground Floor Apartment Shall Include:
* 1 Master Bedroom with an attached bathroom.
* 1 Standard Bedroom.
* 1 Common Bathroom.
* 1 Kitchen.
* 1 Living/Dining Area.
* Practical layout with minimal wasted space.
## 4. First Floor Requirements
* Design **3 independent 2-bedroom apartments**.
### Each First Floor Apartment Shall Include:
* 1 Master Bedroom with an attached bathroom.
* 1 Standard Bedroom.
* 1 Common Bathroom.
* **Total Bathrooms: 2**
* 1 attached master bathroom.
* 1 common bathroom.
* 1 Kitchen.
* 1 Living/Dining Area.
* Access through a central lobby or efficient circulation space.
## 5. General Design Guidelines
* Maximize usable carpet area and room sizes.
* Minimize unnecessary corridors and dead space.
* Provide wardrobe space in bedrooms.
* Ensure furniture placement is practical and comfortable.
* Keep the design simple, symmetrical, and cost-effective to construct.
* Maintain good natural light and cross-ventilation using the available side passages.
* Do not place any openings on the rear dead wall.
## 6. Design Objective
The final design should provide spacious, functional, and rental-friendly apartments while maximizing the use of the available plot area and complying with the ventilation and boundary constraints.