Commercial Building Structural Design
Budget: ₹600 – ₹1,500 INR
I’m starting a brand-new commercial development and need a structural engineer who can take it from a blank sheet of paper to permit-ready drawings. Because no architectural plans exist yet, you will be involved from day one—working alongside my architect to shape the overall structural concept, run all design calculations, and make sure every beam, column and foundation detail is code-compliant and buildable.
Here's a professional, detailed project description you can paste directly into Freelancer. It clearly explains that you want a **complete structural design package**, not just a few drawings.
---
## Project Description
I am looking for an experienced Structural Engineer to provide a **complete structural design package** for a new **Basement + Ground + 3 Floors (B+G+3)** commercial showroom building located on a **25 ft × 84 ft (7.62 m × 25.60 m) corner plot** in **Kanpur, Uttar Pradesh, India**.
This is a **new project starting from scratch**, so I need complete structural engineering, analysis, calculations, and construction drawings suitable for execution on site.
The design must comply with the latest applicable Indian Standards (IS Codes), including but not limited to IS 456, IS 875, IS 1893, IS 13920, and other relevant codes.
---
## Building Information
**Building Type**
Commercial Showroom
**Configuration**
* Basement + Ground + 3 Floors (B+G+4)
**Floor Heights**
* Basement: 11 ft
* Ground Floor: 15 ft
* First Floor: 11 ft
* Second Floor: 11 ft
* Third Floor: 11 ft
* Forth Floor: 11 ft
**Site Size**
* 25 ft × 84 ft
* Corner Plot
---
## Building Usage
Each floor will display different building materials and interior products, including:
* Tiles
* Marble
* Granite
* Sanitaryware
* Bath Fittings
* Decorative Laminates
* Mica Sheets
* Plywood
* Hardware
* Interior Decor Products
* Other construction and finishing materials
The structure must be designed considering these commercial display loads.
---
## Basement Information
The basement is intended only for storage, inventory, and utility purposes.
There will be:
* No vehicle parking
* No parking ramp
* No car movement
Only goods storage and service access.
---
## Staircase & Lift
The building includes:
* One passenger lift
* Staircase wrapping around the lift core
* Structural design should properly integrate the lift shaft and staircase.
---
# Scope of Work
I need a **complete structural engineering package**, including but not limited to the following:
### 1. Structural Analysis
* Complete ETABS or STAAD structural model
* Gravity load analysis
* Wind load analysis
* Earthquake analysis
* Load combinations
* Deflection checks
* Drift checks
* Stability checks
---
### 2. Foundation Design
Complete foundation design including:
* Soil assumptions (or based on soil report if provided later)
* Footing type selection
* Isolated/Combined/Raft footing (as applicable)
* Footing size calculations
* Foundation layout
* Footing reinforcement
* PCC details
* Pedestal details
* Foundation schedule
---
### 3. Column Design
Provide:
* Column layout
* Column schedule
* Column sizes
* Column reinforcement
* Starter bars
* Lap locations
* Tie spacing
* Development length
* Complete column drawings
---
### 4. Beam Design
Provide:
* Beam layout
* Beam schedule
* Beam sizes
* Top reinforcement
* Bottom reinforcement
* Extra reinforcement
* Stirrups spacing
* Beam sections
* Beam detailing
---
### 5. Slab Design
Provide:
* Slab thickness
* Main reinforcement
* Distribution reinforcement
* Negative reinforcement
* Opening reinforcement
* Cantilever details
* Slab schedules
---
### 6. Staircase Design
Provide complete drawings including:
* Waist slab
* Landing reinforcement
* Step reinforcement
* Beam connection details
---
### 7. Lift Shaft Design
Provide structural drawings for:
* Lift pit
* Lift walls
* Lift beams
* Lift openings
* Reinforcement details
---
### 8. Roof Structural Design
Including:
* Roof slab
* Water tank support (if required)
* Machine room support (if required)
---
### 9. Reinforcement Detailing
I expect complete reinforcement detailing, including:
* Rebar diameters
* Rebar spacing
* Cutting lengths
* Bar bending schedules (BBS)
* Anchorage
* Hooks
* Development lengths
* Lap splice details
* Cover requirements
Clearly specify where to use:
* 8 mm
* 10 mm
* 12 mm
* 16 mm
* 20 mm
* 25 mm
* or any other required reinforcement.
---
### 10. Concrete Specifications
Clearly specify:
* Concrete grade for footing
* Concrete grade for columns
* Concrete grade for beams
* Concrete grade for slabs
* PCC grade
* Cement requirements
* Cover requirements
Example:
* M20
* M25
* M30
* M35
(as required by design)
---
### 11. Steel Specifications
Specify:
* Steel grade
* Fe500
* Fe500D
* Fe550
* or recommended reinforcement steel
---
### 12. Construction Drawings
Provide complete drawings for:
* Foundation plan
* Footing layout
* Column layout
* Beam layout
* Slab layout
* Staircase
* Lift shaft
* Sections
* Structural elevations
* Typical details
* Construction notes
---
### 13. Structural Calculations
Provide complete calculation report including:
* Load calculations
* Dead load
* Live load
* Wind load
* Earthquake load
* Member design calculations
* Footing calculations
* Beam calculations
* Column calculations
* Slab calculations
---
### 14. Bar Bending Schedule (BBS)
Complete BBS for:
* Footings
* Columns
* Beams
* Slabs
* Staircase
* Lift
---
### 15. BOQ
Provide estimated quantities for:
* Concrete
* Reinforcement Steel
* PCC
* Excavation
* Backfilling
* Formwork
---
## Deliverables
I expect the following files:
* PDF Drawings
* AutoCAD (.DWG)
* ETABS Model
* SAFE Model (if used)
* STAAD Model (if used)
* Excel Calculation Sheets
* Structural Calculation Report
* Reinforcement Drawings
* Bar Bending Schedule (BBS)
* BOQ
* Editable source files
---
## Important
The design should be practical, economical, safe, and optimized for construction while complying with all relevant Indian Standards. I am looking for an engineer who can provide a **complete, construction-ready structural package**, not just basic drawings.
Please include examples of similar commercial building projects you have completed, your proposed design software (ETABS/SAFE/STAAD Pro/Revit/AutoCAD), estimated timeline, and total project cost in your proposal.
Here's a professional, detailed project description you can paste directly into Freelancer. It clearly explains that you want a **complete structural design package**, not just a few drawings.
---
## Project Description
I am looking for an experienced Structural Engineer to provide a **complete structural design package** for a new **Basement + Ground + 3 Floors (B+G+3)** commercial showroom building located on a **25 ft × 84 ft (7.62 m × 25.60 m) corner plot** in **Kanpur, Uttar Pradesh, India**.
This is a **new project starting from scratch**, so I need complete structural engineering, analysis, calculations, and construction drawings suitable for execution on site.
The design must comply with the latest applicable Indian Standards (IS Codes), including but not limited to IS 456, IS 875, IS 1893, IS 13920, and other relevant codes.
---
## Building Information
**Building Type**
Commercial Showroom
**Configuration**
* Basement + Ground + 3 Floors (B+G+4)
**Floor Heights**
* Basement: 11 ft
* Ground Floor: 15 ft
* First Floor: 11 ft
* Second Floor: 11 ft
* Third Floor: 11 ft
* Forth Floor: 11 ft
**Site Size**
* 25 ft × 84 ft
* Corner Plot
---
## Building Usage
Each floor will display different building materials and interior products, including:
* Tiles
* Marble
* Granite
* Sanitaryware
* Bath Fittings
* Decorative Laminates
* Mica Sheets
* Plywood
* Hardware
* Interior Decor Products
* Other construction and finishing materials
The structure must be designed considering these commercial display loads.
---
## Basement Information
The basement is intended only for storage, inventory, and utility purposes.
There will be:
* No vehicle parking
* No parking ramp
* No car movement
Only goods storage and service access.
---
## Staircase & Lift
The building includes:
* One passenger lift
* Staircase wrapping around the lift core
* Structural design should properly integrate the lift shaft and staircase.
---
# Scope of Work
I need a **complete structural engineering package**, including but not limited to the following:
### 1. Structural Analysis
* Complete ETABS or STAAD structural model
* Gravity load analysis
* Wind load analysis
* Earthquake analysis
* Load combinations
* Deflection checks
* Drift checks
* Stability checks
---
### 2. Foundation Design
Complete foundation design including:
* Soil assumptions (or based on soil report if provided later)
* Footing type selection
* Isolated/Combined/Raft footing (as applicable)
* Footing size calculations
* Foundation layout
* Footing reinforcement
* PCC details
* Pedestal details
* Foundation schedule
---
### 3. Column Design
Provide:
* Column layout
* Column schedule
* Column sizes
* Column reinforcement
* Starter bars
* Lap locations
* Tie spacing
* Development length
* Complete column drawings
---
### 4. Beam Design
Provide:
* Beam layout
* Beam schedule
* Beam sizes
* Top reinforcement
* Bottom reinforcement
* Extra reinforcement
* Stirrups spacing
* Beam sections
* Beam detailing
---
### 5. Slab Design
Provide:
* Slab thickness
* Main reinforcement
* Distribution reinforcement
* Negative reinforcement
* Opening reinforcement
* Cantilever details
* Slab schedules
---
### 6. Staircase Design
Provide complete drawings including:
* Waist slab
* Landing reinforcement
* Step reinforcement
* Beam connection details
---
### 7. Lift Shaft Design
Provide structural drawings for:
* Lift pit
* Lift walls
* Lift beams
* Lift openings
* Reinforcement details
---
### 8. Roof Structural Design
Including:
* Roof slab
* Water tank support (if required)
* Machine room support (if required)
---
### 9. Reinforcement Detailing
I expect complete reinforcement detailing, including:
* Rebar diameters
* Rebar spacing
* Cutting lengths
* Bar bending schedules (BBS)
* Anchorage
* Hooks
* Development lengths
* Lap splice details
* Cover requirements
Clearly specify where to use:
* 8 mm
* 10 mm
* 12 mm
* 16 mm
* 20 mm
* 25 mm
* or any other required reinforcement.
---
### 10. Concrete Specifications
Clearly specify:
* Concrete grade for footing
* Concrete grade for columns
* Concrete grade for beams
* Concrete grade for slabs
* PCC grade
* Cement requirements
* Cover requirements
Example:
* M20
* M25
* M30
* M35
(as required by design)
---
### 11. Steel Specifications
Specify:
* Steel grade
* Fe500
* Fe500D
* Fe550
* or recommended reinforcement steel
---
### 12. Construction Drawings
Provide complete drawings for:
* Foundation plan
* Footing layout
* Column layout
* Beam layout
* Slab layout
* Staircase
* Lift shaft
* Sections
* Structural elevations
* Typical details
* Construction notes
---
### 13. Structural Calculations
Provide complete calculation report including:
* Load calculations
* Dead load
* Live load
* Wind load
* Earthquake load
* Member design calculations
* Footing calculations
* Beam calculations
* Column calculations
* Slab calculations
---
### 14. Bar Bending Schedule (BBS)
Complete BBS for:
* Footings
* Columns
* Beams
* Slabs
* Staircase
* Lift
---
### 15. BOQ
Provide estimated quantities for:
* Concrete
* Reinforcement Steel
* PCC
* Excavation
* Backfilling
* Formwork
---
## Deliverables
I expect the following files:
* PDF Drawings
* AutoCAD (.DWG)
* ETABS Model
* SAFE Model (if used)
* STAAD Model (if used)
* Excel Calculation Sheets
* Structural Calculation Report
* Reinforcement Drawings
* Bar Bending Schedule (BBS)
* BOQ
* Editable source files
---
## Important
The design should be practical, economical, safe, and optimized for construction while complying with all relevant Indian Standards. I am looking for an engineer who can provide a **complete, construction-ready structural package**, not just basic drawings.
Please include examples of similar commercial building projects you have completed, your proposed design software (ETABS/SAFE/STAAD Pro/Revit/AutoCAD), estimated timeline, and total project cost in your proposal.