2D architecture for a Villa

Job ID: 37198919

Budget: $10 – $30 USD

The project is to design a 2D plan for a home on the ground floor + a business (a co-working space) in the first and second floor.

The land is 543-meter square – land number 143 (attached the dimensions)
The home entrance should be from the side of 15.22 meter. The entrance of the co-working space should be from the side of 22.07 (For the privacy of the home).

The home contains the following:
1. 1 living room for the family (preferred to be in the side of 15.22 or 27.22 or both)
2. 1 living room for guest
3. 1 WC close to the living room.
4. 1 guest bedroom (with wardrobe), close to the living room
5. 1 kitchen (with a storage) close to the living room (no less than 25-meter squares).
6. 2 bedrooms (with wardrobe) for children close to a WC
7. 1 Master bedroom for parents (dressing and WC).
8. 1 garage for 2 cars. The garage should be connected to the home. The garage should contains a small kitchen and a WC.

Notes:
- Living room 1 and living room 2 should be connected through a door to have a BIG living room.
- A barbecue corner in the outdoor area.
- At the home entrance, consider having a place for shoes, bugs, etc.
- The space under the stairs should be used.
- The home surface must not exceed 180-meter squares. (200 max)
- The best place for a garden/pool and outdoor sitting area is the side of 15.22 and 27.22
- The government policy: the distance between the land border and the home wall should be 4 meters. Exception for the garage, it could be close to the land border, but not the door of the garage (picture attached as an example).
- If you succeed to propose a good plan for the home, we go for the plan of the co-working space in the first and second floor.
- Time allocated for this project 24 hours.