Revit Pasta Bridge
Budget: $50 – $100 AUD
A custom pasta family is to created with diameter of 10mm
A 3D model of the bridge is to be produced using Autodesk Revit. This model will be used to produce a single A3 drawing. The drawing shall contain sufficient information so that somebody else could build your bridge, having only this drawing.
As a guide, this drawing should show the following:
• 1 x plan view
• 1 x section view through the centre of the bridge
• 1 x connection detail
• 1 x side elevation
• 1 x 3D view of the whole structure.
• All relevant dimensions are shown
• Materials used
• Have a title block with all relevant information shown
Items to submit:
• 1 x A3 drawing as per the above specification in PDF format
• 1 x Revit file (.rvt)
A 3D model of the bridge is to be produced using Autodesk Revit. This model will be used to produce a single A3 drawing. The drawing shall contain sufficient information so that somebody else could build your bridge, having only this drawing.
As a guide, this drawing should show the following:
• 1 x plan view
• 1 x section view through the centre of the bridge
• 1 x connection detail
• 1 x side elevation
• 1 x 3D view of the whole structure.
• All relevant dimensions are shown
• Materials used
• Have a title block with all relevant information shown
Items to submit:
• 1 x A3 drawing as per the above specification in PDF format
• 1 x Revit file (.rvt)
Related categories:
Building Architecture
3D Rendering
AutoCAD
3D Modelling
3D Design
Revit
Revit Architecture
3D Visualization