Design a custom 3D steel greenhouse design with sketchup
Budget: $60 – $140 USD
Hi, i need help with designing a custom greenhouse with sketchup. the greenhouse is on top of my fathers home roof. It is going to be almost 10m by 7m by almost 3m high.
It will be made from light gauge galvanized steel studs. The studs are 3m long.
Width are different there are 4cm and 5cm that are 0.45mm thick
and there are 7.5cm that are 0.9mm thick.
And suntuf polycarbonate roof.
It will need a water tank inside the greenhouse and a honeumycomb wall and a greenhouse fan.
The design will be a slope roof. I will put an image of the location. I need also a design for the pots and rised beds inside the greenhouse knowing that it will be automatically agrigated by a small aggregation pipe and a water clock.
Only people with experience in the subject will be accepted. Please send your previous work in light gauge cold steel framing design. Thank you.
Good luck to all.
It will be made from light gauge galvanized steel studs. The studs are 3m long.
Width are different there are 4cm and 5cm that are 0.45mm thick
and there are 7.5cm that are 0.9mm thick.
And suntuf polycarbonate roof.
It will need a water tank inside the greenhouse and a honeumycomb wall and a greenhouse fan.
The design will be a slope roof. I will put an image of the location. I need also a design for the pots and rised beds inside the greenhouse knowing that it will be automatically agrigated by a small aggregation pipe and a water clock.
Only people with experience in the subject will be accepted. Please send your previous work in light gauge cold steel framing design. Thank you.
Good luck to all.