Siemens S7-1200 PLC Programming
Budget: ₹750 – ₹1,250 INR
I need an experienced Siemens PLC developer who can jump straight into a live project and write a fresh program for a 6 kV DC power-supply rig running on an S7-1200 CPU 1212C. The scope is limited to new code only; there is no legacy logic to debug or modify.
The program must:
• Drive the power-supply output with precise ramp-up, hold and ramp-down profiles
• Continuously monitor voltage, current and internal status flags so alarms are raised in real time
• Implement hard-wired and software safety interlocks, plus an orderly shutdown routine whenever limits are breached
Only written documentation is available, so you will be expected to derive any missing I/O maps or signal diagrams as you go. Remote work is fine provided you can securely take control of the PLC and HMI over our VPN; otherwise you are welcome to work on-site in Bangalore for faster integration and testing.
Deliverables
• Fully commented Step 7 (TIA Portal) project file
• Tested upload to the target CPU and demonstration of all core functions
• Brief commissioning report outlining I/O mapping, safety logic and test results
I am ready to start immediately and can make the hardware available for online sessions as soon as we agree on the approach.
Assistance require for PLC Software installation in our system
The program must:
• Drive the power-supply output with precise ramp-up, hold and ramp-down profiles
• Continuously monitor voltage, current and internal status flags so alarms are raised in real time
• Implement hard-wired and software safety interlocks, plus an orderly shutdown routine whenever limits are breached
Only written documentation is available, so you will be expected to derive any missing I/O maps or signal diagrams as you go. Remote work is fine provided you can securely take control of the PLC and HMI over our VPN; otherwise you are welcome to work on-site in Bangalore for faster integration and testing.
Deliverables
• Fully commented Step 7 (TIA Portal) project file
• Tested upload to the target CPU and demonstration of all core functions
• Brief commissioning report outlining I/O mapping, safety logic and test results
I am ready to start immediately and can make the hardware available for online sessions as soon as we agree on the approach.
Assistance require for PLC Software installation in our system