Live CODESYS PID Control Coaching
Budget: $10 – $30 USD
I’m ready to jump on Zoom right now and share my screen. I need step-by-step guidance in CODESYS V3.5 to build, tune, and test a PID loop that:
• reads blower RPM from a pulse/encoder input,
• drives a hydraulic motor through a 4-20 mA analog output, and
• lets me monitor and adjust gains in real time.
During the call we’ll configure the I/O channels, scale raw counts to engineering units, drop in the standard PID function block, map its output to the current loop, and walk through live tuning methods. I also want to see best-practice structuring of the program, task settings, safety interlocks, and a quick trend or oscilloscope view for verification.
By the end of the session I expect:
1. A working CODESYS project file with clear comments.
2. A concise cheat-sheet of the parameters we set and the tuning approach we used.
3. Enough confidence to adjust the loop on my own after we hang up.
If you can start immediately and are comfortable explaining as you go, let’s connect right away.
• reads blower RPM from a pulse/encoder input,
• drives a hydraulic motor through a 4-20 mA analog output, and
• lets me monitor and adjust gains in real time.
During the call we’ll configure the I/O channels, scale raw counts to engineering units, drop in the standard PID function block, map its output to the current loop, and walk through live tuning methods. I also want to see best-practice structuring of the program, task settings, safety interlocks, and a quick trend or oscilloscope view for verification.
By the end of the session I expect:
1. A working CODESYS project file with clear comments.
2. A concise cheat-sheet of the parameters we set and the tuning approach we used.
3. Enough confidence to adjust the loop on my own after we hang up.
If you can start immediately and are comfortable explaining as you go, let’s connect right away.
Related categories:
Training
Technical Support
Embedded Systems
Signal Processing
Data Visualization
Automation