Convert STL Scans to DXF Sketches
Budget: $8 – $15 AUD
I have a steady stream of 3D scans in STL format—mostly decorative geometries and occasional logo text—that need to be translated into clean, machinable 2D sketches - DXF. Using Autodesk Fusion 360, you’ll open each STL, trace or re-sketch the relevant 3D profiles into a 2D Sketch, and deliver a single DXF file per part ready for my CAM workflow.
Key points
• Work is centred on decorative geometries; some pieces include lettering that must stay legible.
• Keep linework precise, closed, and on one plane so I can slot it straight into tool-path setup.
• I’ll provide a sample STL to start; if that looks good, more files will follow on an ongoing basis.
If you’re comfortable moving from STL to 2D inside Fusion and can turn these around quickly, let’s get started.
Key points
• Work is centred on decorative geometries; some pieces include lettering that must stay legible.
• Keep linework precise, closed, and on one plane so I can slot it straight into tool-path setup.
• I’ll provide a sample STL to start; if that looks good, more files will follow on an ongoing basis.
If you’re comfortable moving from STL to 2D inside Fusion and can turn these around quickly, let’s get started.