I need a CAD operator (simple work but quick turn around needed)
Budget: $750 – $1,500 CAD
The key concern here is timing - These must be done to 90% by Sunday morning 10:30am Eastern Standard Time.
The work involves shop drawings for watermain restraints to be used by the contractor for connections in a regional watermain replacement project. No design is required, just the CAD work. A sample pdf is provided below. Eight original ACAD 2019 (or 2022) plan & profile drawings will be provided to assist with a plan-view layout of the necessary pipe restraint lengths to be used in the construction. Work can be completed using 11x17 (tabloid) sized documents. I estimate a most 15-18 max of these smaller drawings should be enough to complete the work (Full sized drawings may also be used if easier). A metric scale of 1:150 or 1:200 should be used, although it will be noted NTS due to the vertical bends required in some of the pipe installation.
The work involves shop drawings for watermain restraints to be used by the contractor for connections in a regional watermain replacement project. No design is required, just the CAD work. A sample pdf is provided below. Eight original ACAD 2019 (or 2022) plan & profile drawings will be provided to assist with a plan-view layout of the necessary pipe restraint lengths to be used in the construction. Work can be completed using 11x17 (tabloid) sized documents. I estimate a most 15-18 max of these smaller drawings should be enough to complete the work (Full sized drawings may also be used if easier). A metric scale of 1:150 or 1:200 should be used, although it will be noted NTS due to the vertical bends required in some of the pipe installation.