DXF Files for Laser Cutting
Budget: $20 – $60 USD
I need two DXF files created for laser cutting based on my detailed mechanical part drawings (PDF format). These are precision steel components for a compressor stabilization product, so accuracy is critical.
What I need:
Convert my PDF mechanical drawings into two separate DXF files
Pulley Side Plate
Label Side Plate
Each DXF must contain only the cut geometry
Outer profile: 8.000" × 1.500"
Two slots per plate: 1.000" × 0.375"
Slot centers are measured from the RIGHT edge
First slot center: 1.500" from right
Second slot center: 4.9375" to the left of the first slot (center‑to‑center)
Vertical slot centers:
Pulley Side: 0.750" from bottom
Label Side: 0.500" from bottom
No text, no title block, no dimensions — DXF must contain only vector cut paths
What I need:
Convert my PDF mechanical drawings into two separate DXF files
Pulley Side Plate
Label Side Plate
Each DXF must contain only the cut geometry
Outer profile: 8.000" × 1.500"
Two slots per plate: 1.000" × 0.375"
Slot centers are measured from the RIGHT edge
First slot center: 1.500" from right
Second slot center: 4.9375" to the left of the first slot (center‑to‑center)
Vertical slot centers:
Pulley Side: 0.750" from bottom
Label Side: 0.500" from bottom
No text, no title block, no dimensions — DXF must contain only vector cut paths