Concrete pole footer design in Missouri
Budget: $30 – $250 USD
We are an electrical contractor and we have excavated and installed formwork and rebar for a parking lot pole fixture. We were informed by the municipality that they require stamped engineering drawings before they will inspect and approve us to pour concrete. I have made as-built drawings showing what we installed. We need a Missouri licensed structural engineer to either A) sign off on the as-builts, or B) redesign the drawing and we will make adjustments to the existing work to meet code. As built drawings are attached.
The pole is an existing 4" x 25' square steel pole, 11ga. As this is a pole that was previously installed at the same site, I do not have a spec sheet.
(2) fixtures will be direct arm mounted in a 180 degree orientation to each other at the top of the pole. The fixtures not be tilted from horizontal. Spec sheet with EPA data attached.
The pole is an existing 4" x 25' square steel pole, 11ga. As this is a pole that was previously installed at the same site, I do not have a spec sheet.
(2) fixtures will be direct arm mounted in a 180 degree orientation to each other at the top of the pole. The fixtures not be tilted from horizontal. Spec sheet with EPA data attached.