Basic 3D CAD Product Design
Budget: $30 – $250 USD
I need a 3D CAD drawing for product design using AutoCAD. A basic outline is sufficient.
Details:
- The entire assembly (main body and fingers) has a diameter of 3/8".
- The fingers extend to a length of 2.20".
- The overall length of the device is 50 feet.
- The material is synthetic rubber, and it’s a single continuous piece.
- The fingers are oriented 360 degrees to maintain surface area of no more than 16 linear inches. At least three fingers should be on the same axis, and then the next group of fingers start about 0.83" below. Every 16", the pattern starts over again.
- The device will be fitted inside a pipe, ensuring particles do not free-fall more than 16" without hitting a finger.
Ideal skills and experience:
- Proficiency in AutoCAD
- Experience in product design
- Ability to create clear, basic outline drawings
Details:
- The entire assembly (main body and fingers) has a diameter of 3/8".
- The fingers extend to a length of 2.20".
- The overall length of the device is 50 feet.
- The material is synthetic rubber, and it’s a single continuous piece.
- The fingers are oriented 360 degrees to maintain surface area of no more than 16 linear inches. At least three fingers should be on the same axis, and then the next group of fingers start about 0.83" below. Every 16", the pattern starts over again.
- The device will be fitted inside a pipe, ensuring particles do not free-fall more than 16" without hitting a finger.
Ideal skills and experience:
- Proficiency in AutoCAD
- Experience in product design
- Ability to create clear, basic outline drawings